Top 9 Vacuum Carburetor Syn

This Blue Universal Fuel Vacuum Carburetor Synchronize Tool Kit Motorcycle Fuel Vacuum Carburetor Synchronizer Balancer Carb Sync Balancing Gauge Set is made of high quality material. The shut off valve and all hardware is high grade chrome finish instead of brass for longer life, higher corrosion resistance and better flow accuracy. Air flow control is handled by needle and seat valves instead of knobs. This helps to resist the dial indicator “”bounce”” associated with many other lower quality gauges.

Product Specification:
Contains:
3-1/2″ Synchronizer Gauges with Fixed Plate (vacuum)—–4 PCS
Rubber Pipes 8x5x750mm—–4 PCS
Tubes of Extension 3.9x52mm—–4 PCS
Tubes of Extension 3.9x122mm—–4 PCS
Tubes of Conical Type Connector 8x40mm—–8 PCS
Tubes 10x53mm ( M6x0.75)—–4 PCS
Tubes 10x60mm ( M6x1.0)—–4 PCS

Feature: :
Made of high-quality material, this tool set is very durable and long serveice life.
This kit lets you synchronise the values of up to 4 carburettors as well as adjust and set them.
Features a bank of 4 gauges with lockable valves enabling user to hold vacuum values in use.
80mm diameter gauges with fixed plate and 4 x 750mm rubber hoses.
Supplied with set of long and short carburettor adaptors and connectors for easy access.
For testing fuel pump carburetor and transmission check auto with 2~4 pcs carburetors
This tool kit comes in a heavy-duty blow-mold plastic carrying case with a handle and front locks for easy transport, convenient storage, and organization
Used for: pumps, compressors, hydraulic presses, machinery, pneumatic equipment and motors in harsh environments, where harmful vibration and pulsation are present.
Package: standard retail carton

DELIVERY DETAILS:
Please offer correct address and contact information.
Full name, telephone number and your Physical Address but not PO Box/APO/FPO address.

Specification:

Condition:100% Brand New
Product Name: Motorcycle Vacuum Gauge Balancer
Material: Metal & Plastic
Shell Color: Blue
Lens Color: Transparent
Diameter: 7cm / 2.75″
Height: 2.8cm / 1.1″
Quantity: 2pcs

Fitment:
Universal For Motorcycle

Features:
– High Class Quality and Very Durable
– Each gauge has damping control and calibration control
– Easy to install
– Excellent quality vacuum gauges enable easy synchronisation and balancing of motorcycle carburettors

Package Includes:
2 x Motorcycle Vacuum Gauge Balancer

Premium Carburetor Synchronizer Carb Sync Tool. Dune Buggy, VW Bug, Karmann Ghia, VW Bus, Motorcycle Trike.

Uni-Sync Is A Precision Instrument That Provides A Visual Method Of Balancing The Performance Of Each Carburetor In Multiple Carb Set-Ups With A High Degree Of Accuracy.
This Multiple Carburetor Synchronizer Works With Side Draft Or Down Draft Carburetors.
Also Referred To As,

Carb Synchronizer
Carburetor Synchronizer Tool
Dual Carb Tool
Motorcycle Carburetor Synchronizer Tool
Single Carb Tool
Vacuum Carburetor Sychronizer
Vacuum Gauge Sync

GENERAL INSTRUCTIONS
The UNI-SYNC Is An Instrument For Balancing Multiple Carburetors Of Virtually Any Type Whether Vertically Or Laterally Positioned

TO OPERATE
Warm Engine To Normal Operating Temperatures.
Remove Air Cleaner; Disconnect Linkage.
Place UNI-SYNC Over Throat Of One Carburetor.
With Adjusting Screw (A) In Open Position, Gradually Turn Down Until Float (B) In Tube (C) Rises To, Or Near, Any Graduating Mark.
Without Changing Position Of Adjust Screw Place UNI-SYNC On Remaining Carburetors, Adjusting Each Carburetor Throttle-Stop-Screw To Bring Float (B) To Approximately Same Level As In Step 4.
If The Idling Speed Is Too Fast, Back Off The Throttle Stop Screw On One Carburetor Adjust The UNI-SYNC To That Carburetor, And then Rebalance The Other Carburetors. Now Carefully Reconnect Linkage.

At This Time The Motor Speed Is Increased Just Enough So The Carburetor Control Arms Do Not Touch The Top Screws, Then Locking The Accelerating Control At A Point That Will Not Affect The Linkage To The Carburetor. The Linkage May Then Be Checked And Adjusted By Using The UNI-SYNC In The Same Manner As For Adjusting The Idle Screws.

Precise four channel vacuum indicator designed specifically for intake synchronization of engines with multiple carburetors or throttle bodies (maximum vacuum rating for this tool is 40cm Hg). For use with any 2, 3 or 4 cylinder four stroke motorcycles. includes hang hook to clip onto the handlebars for easy use.

Complete 4 Carb Kit Includes:

Properly synced carburetors are essential for engines with multiple carburetors. This setup for two carburetors will get your engine running smoothly. Comes with Vacuum gauges, Hoses, Adaptors, Mounting plate, Instructions. Two sets required for four carburetor models.

6mm x 1.0 Brass Adapter kit – set of 4 brass adapters 2 x 2″- 2 x 4″ Optional 6mm adapters are available for use on most Yamaha models.. Most Kawasaki models do not need adapters. Carb Adapter Set (2 Short/2 Long)