793 reviews analysed
1. Dryer Duct Cleaning Kit- Generic Vacuum Hose Attachment Flexible and 30 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush/Radiator Brush. Fits Vacuum Hoses 1 1/4 inches or Less
- You will receive – one flexible 24 inch crevice tool cleaner with 3 adapters and one long 30 inch brush
- VACUUM ATTACHMENT: 24″ Long – The tip width measures 5/8 inch check with of area you want to clean. With supplied adapters fits vacuum hoses up to 1 3/4 inches ** Does not fit Dyson **
- You can use the crevice tool without the adapters if it fits or use one or all 3 adapters to make it fit your vacuum hose. The adapters will fit into each other to make a variety of connections. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches. You’ll probably say these REALLY are the Worlds Greatest Adapters.????
- BRUSH SPECS: Full Brush Length: 30” – Without Handle: 24-1/4” – Bristles Diameter: 1-1/2” – Steel Wire Diameter: 3/8” – Brush color: black – Handle Color: black – Longer than other brands.
- BRUSH USES: Clean your dryer lint trap, fridge coils/ condenser coils, exhaust vents, AC vents, radiators and under your appliances. Bends like a lizard in your dyer lint trap but is not too flimsy.
2. Dryer Vent Cleaner Kit Vacuum Hose Attachment Brush Lint Remover Power Washer and Dryer Vent Vacuum Hose
- [Remove LINT BUILD-UP] – Sealegend dryer vent cleaner kit removes lint that has accumulated for many years in the dryer vents, so your equipment runs more efficiently.
- [More than 28” long] – Flexible and handy vacuum hose attachments over 28inche in length allow for deep access to difficult places. Perfect for cleaning appliances that you can’t move.
- [SUCTION CONTROL] – Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- [HELPS PREVENT FIRES] – Using Sealegend Lint Remover regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- [Package Contains] – 1* Sealegend dryer vent cleaner kit
3. Flexible Crevice Tool & 35mm to 32mm Hose Adapter for 1 3/8” Vacuum 24.4inch Long
- Clean those hard-to-reach places like dryer vents, heating ducts, under furniture, along side the refrigerator, under kitchen appliances or heavy furniture
- It bends up to 180 degrees and provides a 24.4 inch reach
- 1-3/8”(35mm) to 1-1/4”(32mm) Hose Adapter, use 1-3/8-inch hose with 1-1/4inch attachments
- This kit fits both 32mm vacuum wand and 35mm vacuum wand.
- The kit is only for vacuums accepting 35mm or 32mm inner diameter attachents. Please measure and confirm your vacuum attachments inner diameter before purchasing.
One of our most popular generic attachments, this 24.4″ long flexible crevice tool allows cleaning in the most hard to reach areas of your home. Tool fits any vacuum cleaner accepting 1 1/4″ inch attachment. The attachment only fits vacuums accepting 32mm or 35mm inner diameter attachments. Please measure and make sure the size of attachment that fits your vacuum. If the tool got clogged, please take off both ends of the tool, and squeeze or poke it out with a long stick.
4. Gadjit Exten Vac Flat Vacuum Cleaner Attachment Hose Extender (Gray)- 36" Reach Under Fridge and Heavy Furniture, Vacuums Up Dirt and Dust Bunnies, Great for Big and Small Cleaning Projects
- Ever wonder what’s living and hiding under your fridge or furniture? Dust bunnies, crumbs & pet hair — oh my!
- Let the long arm of Gadjit Exten Vac get rid of those hidden messes!
- Exten vac is a flat vacuum attachment that reaches under appliances and heavy furniture to remove dust and dirt.
- Adjusts to fit on most vacuum cleaner hoses. Perfect tool for the job.
- Has a 36 inch reach! Two piece design easily snaps together. MADE IN CANADA.
Gadjit Exten Vac is an Extendable Under-Appliance and Furniture Vacuum Cleaner Wand that Vacuums Up Dirt, Crumbs, and Dust Bunnies. Exten Vac is a flat vacuum attachment that is made for cleaning under refrigerators, ovens, dishwashers, and even heavy furniture. It adjusts to fit most vacuum cleaner hose and provides a 36” reach. That’s three extra feet of cleaning power! EASY TO USE: To attach Exten Vac, just slide the graduating end of the Exten Vac into the end of your vacuum hose until it stops. Consists of two sturdy pieces of plastic that easily snap together. Specifications: Color: Gray Dimensions: 20.25″ x 2.25″ x 2″ Made in Canada UPC: 728685401157
5. Dryer Cleaning Kit – Generic Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush. Fits vacuum hoses 1 1/4 inches or less -by Mountain Trades
- You will receive – one flexible 24 inch crevice tool cleaner and one long 28 inch brush
- VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. ** Important – your vacuum hose needs to have a diameter of 1.25 or less to fit)** Does not fit Dyson ** See Description below for info on Shark Vacuum Cleaners. (measure the Shark vacuum hose to make sure it is 1.25 inches or less)
- Hose attachment is flexible but not flimsy – Has better airflow than others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Dryer lint brush is flexible – It is a 28 inch vent & coil cleaning tool designed specifically for reaching hard-to-clean areas like down in your lint trap.
- Both the hose attachment and the lint brush are flexible. If the weather is cold when you receive the crevice tool it may be a little stiff, as it warms to room temperature it will become flexible.
Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator…… Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap…… If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool.(Doing this will cut down on clogs in your crevice tool even though the suction end of this tool is wide enough to have good airflow and still be small enough for most dryer “Lint traps” (end of tool is 15mm width) …. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. ** ….Please make sure that your vacuum hose has a diameter of 1 ¼ inches or less.** Some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool……This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit….. Does not fit Dyson vacuum cleaners…..Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work… Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure). If you are not sure if it will fit your vacuum please ask a question and we will respond.
6. EZ SPARES 25-inch Flexible Vacuum Crevice Attachment Crevice Tool Crevice Brush Tool Kit for All 1-1/4" or 1-3/8"(32mm-35mm) Vacuum Hoses
- Made of High Quality material：25″ Long ,Flexible，fits all vacuums accepting 1 1/4″ (32mm) or 1-3/8″(32mm-35mm) inner diameter attachments.
- Crevice tool：Great for corner, heating ducts, under furniture, along side the refrigerator.
- Flexible bends up to 180 degrees: Don’t worry about trying to contort or bend to reach those spots.”Put the brush into hot water.Soak for a while,take out and drain off.The brush will get straight.”
- Easy to clean：If you want to wash, just rinse with water.
- The brush is TPR material.Good quality and long service life.
7. PetOde Dryer Vent Cleaner Kit Dryer Vent Vacuum Attachment Lint Remover Power Washer and Dryer Vent Vacuum Hose
- 【REMOVES LINT BUILD-UP】: Dryer Vent Vacuum Hose Attachment removes years lint build-up deep within your dryer vent, so your appliance run more efficiently.
- 【OVER 28in LONG】: Handy vacuum hose attachment measures over 28in long to reach deep into difficult places
- Perfect for cleaning behind appliances you can’t move.
- 【SUCTION CONTROL】: Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- 【HELPS PREVENT FIRES】: Using Vacuum Hose Attachment regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- 【CUSTOMER SERVICE】: We will do our best to provide our customers with satisfactory products and services. If you have any questions, we will respond to you within 24 hours.
8. LANMU Flexible Crevice Tool Extension Attachment for Dyson V11 V10 V8 V7 Vacuum Cleaner with Quick Release Converter Adapter
- LANMU Crevice Extension Tool for Dyson Vacuum is made of High Quality material.Durable and Safe.
- Flexible bends up to 180 degrees: No more worry about trying to contort or bend to reach those spots.Great for corner, heating ducts, under furniture,along side the refrigerator.
- Detachable and washable:LANMU Crevice Extension Tool can be taken apart to wash,flexible bend design make it easily to be stored,have a long service life.
- Wide Compatibility:Perfect fits for Dyson V6 DC35 DC45 DC58 DC59 DC62 Vacuum Cleaners,also apply to Dyson V7 V8 V10 V11 Vacuum Cleaner with Convertor Adapter.
- Warranty:LANMU provides 180-day warranty and friendly after-sale service,makes sure the Risk-free shopping for you.
9. Mountain Trades Generic Vacuum Extension Tool 24 inches – Flexible But Not Flimsy- Tapered Fitting to Fit Your Hose- Great for Cleaning Dryer Lint and Under Appliances. Includes 3 Adapters
- Perfect vacuum attachment for cleaning out your dryer lint trap, under most appliances or hard to reach areas ( Measure the width of the areas you need to clean and make sure it is wider than 5/8 inches or 15 mm)
- ADAPTERS- 3 Adapters included. We had these designed to fit most standard vacuum hoses up to 1 3/4 inches. We called these the Worlds Greatest Adapters.
- CREVICE TOOL -Flexible but not flimsy – Has better airflow than others so you will have less clogging. If it feels stiff let it warm to room temperature when you receive it.
- Heavy duty, well-built hose out does the competition. NOT INTENDED FOR DYSON. We have another product for Dyson.
- You can use the crevice tool without the adapters if it fits or use one or all 3 adapters to make it fit your vacuum hose. The adapters will fit into each other to make a variety of connections. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches.
This Generic dryer lint vacuum attachment is a Flexible Vacuum Hose which is perfect for the hard to vacuum areas of your home….You can clean under appliances and in your dryer lint trap that has a gap of a little over ⅝ inches since the thickness of the tool is ⅝ inches, To assemble the crevice tool run hot water over the ends of the hose which will make inserting ends easy. Length of vacuum tool may vary by 1/2 inch. This tool will fit most vacuum hoses using the adapters, but please measure the end of your hose to make sure it will fit. We had these Adapters designed so that they could be used together to fit most vacuum hoses. All you have to do is try inserting one adapter in to another to make what will fit your vacuum hose. ????
By our suggestions above, we hope that you can found Under Dryer Vacuum Attachment for you.Please don’t forget to share your experience by comment in this post. Thank you!