Top 10 Stealth Central Vacuum Hose

The 90298 is an individually packed 30 Ft. (9M) electric hose with direct connect wall end and chrome locking stub tube. The hose is often known as a XZ9231 and features soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. This central vacuum hose connects to the wall via a “direct connect” connection. There is a high quality 30 foot knit hose sock installed on the vacuum hose. The hose is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands. The 30 foot hose has a direct connect end, combining the high voltage pin Jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle.

The #90177 electric hose is an individually packed 35 Ft. electric hose with direct connect wall end and chrome locking stub tube. The hose features a soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. Also includes an installed knit hose sock to protect furnishings. It is compatible with major brands of central vac, including beam, Nutone, Electrolux, Hayden, VacuMaid, aggressor, Vacuflo, md, Canavac, Cyclovac, and Air Vac. The gentle cleaning traits of the dust brush will fit on wands for tough to reach places, and are a must for any accessory kit. It comes applied with an antimicrobial spray, which bonds with the 90177’s installed hose sock, creating a microscopic layer of organic bristle shafts proving inhospitable to mold, mildew and bacteria. The antimicrobial spray is EPA registered and is odorless, colorless and will not wash off under normal use. It protects the tool for a year or more and can be renewed as simply as reapplying the spray application. The hose also is a full 35 feet in length, and includes a soft grip handle with a great ergonomic feel.

The 93059 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93059 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.

Cen-Tec’s 93642 is designed to provide the cleaning accessories most often requested in a low voltage central vacuum hard floor and general-purpose attachment set. The 1.375” x 35 foot hose is longer than the industry standard 30 feet to insure you reach everywhere in your home. A hose with an inner diameter of 1.375” insures superior airflow and improved cleaning performance that also assists the performance of air turbine tools often used with low voltage hoses. Further, the hose allows for switch control to turn the central vacuum on and off at the handle. A 12” natural fill floor brush and fully automatic combination nozzle address hard surfaces, area rugs, and even carpeted surfaces. A premium chrome ratchet telescopic wand with the easy release button down feature and a full set of premium above the floor accessories address upholstery, stairs, table tops, crevices, and baseboards. The tool caddy clip lets them travel with you while you clean. The 93642 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, MD, M&S, Husky, Canavac, Honeywell, and well as most regional brands.

110 v Electric light-weight crush proof hose 360 degree swivel handel

Nutone CH515 Current-Carrying Crushproof Hose 30 Ft. Frost White 1 1/4″ Inner Hose Diameter Three Position On-off Switch Controls Both the Power Unit and Motorized Power Brush Ergonomic Swivel Handle Hose Hanger and Mounting Hardware Included UL and CUL Recognized

The #90177 electric hose is an individually packed 35 Ft. electric hose with direct connect wall end and chrome locking stub tube. The hose features a soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. Also includes an installed knit hose sock to protect furnishings.

The 92938 central vacuum accessory package is designed to provide superior cleaning for today’s home with a mix of both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life-time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishings. We have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The direct connect end makes the system compatible with all major brands of industry standard high volt and low volt electrified inlet valves. By connecting to all major brands of electrified inlets the 92938 is compatible with all major brands of central vacuums with these inlets including beam, ELECTROLUX, eureka, Nutone, VacuMaid, Vacuflo, husky, Canavac, Cyclovac, Md and imperium brands. A 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle ideal for cleaning hard floor surfaces. The three position switch also allows you to also control power to electric nozzle and the vacuum when cleaning carpeted surfaces. A soft anti-microbial treated cotton-lycra blend hose Sock is installed on the hose to protect for surfaces, furnishings, and walls from the corrugation of the hose. The hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance.