Top 10 Rv Central Shop Vacuum
594 reviews analysed
1. Cen-Tec Systems 99911 Stretch Vacuum Hose with Curved End and Cuff, 8 to 30-Feet
- Compatible with major brands of central vac
- including Beam
- Air Vac
- Takes up a small amount of space in storage
- but provides great clean up coverage with its extended length
- Includes a curved end which fits into other vacuum accessories and wands
- Package Dimension: 10.5 “L x 8 “W x 22 “H
The 99911 Stretch Hose is great when you want cleaning up in an area where space is limited. The hose extends from a length of 8 feet to 30 feet with less force than necessary to carry a half gallon of milk. The 99911 is ideal for central vacuum equipped RV’s, boats, mudrooms, or in the kitchen.
2. Cen-Tec Systems 93741 Central Vacuum Garage Attachment Kit with 50 ft. Hose, Black
- Includes a 50 foot crush proof commercial grade vacuum hose featuring the Cen-Tec exclusive arc relax strain relief that helps preserve hose life by reducing kinking and sharp bends at the wall valve and working end of the hose
- Features a four piece premium accessory set including a 30 degree soft grip handle, 13″ wide mouth paddle crevice, paint brush soft dusting tool, and an upholstery tool that is ideal for lifting matted carpet and releasing stuck on dirt from floor mats, trucks, and upholstery. An extra natural fill dusting tool is included for gentle cleaning of cloth upholstery
- The upholstery tool is designed to mimic the commercial car wash tool with a wide throat to pick up large and non-uniform debris
- Designed to fit close to the 360 degree swivel end on the hose to make cleaning easier to control the tools when working in confined space. The swivel feature allows the tools to be positioned for maximum effectiveness
- Includes two plastic extension wands and a 12″ natural fill floor brush allowing you to not only clean the car but also tidy up around the garage
- Contains a handy hose hanger and caddy bag for holding all the tools when not in use. We recommend hanging the hose at close to eye level which reduces the need to tightly coil the hose
- Compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&
- S, Honeywell, MD, Galaxie, Imperium, and Cyclovac
- The 50 foot, 1.25″ diameter crush proof commercial grade hose will last for years, even in harsh high use environments
3. Cen-Tec Systems 91431 Complete Central Vacuum Accessory Kit with Metal Wands
- Designed to provide a basic set of accessory tools for a central vacuum. The 91431 features a 1.25” x 30 foot non-electric hose produced using a unique process that provides a very smooth interior for superior airflow and quieter use
- The 13” metal friction curved end is designed to swivel over the hose meaning less stress on you and the hose. Friction indicates that all tool to tool connections are made by the two parts wedging, pressing together without a physical locking mechanism
- The wall end is an industry standard 1.50” on the outer diameter making it compatible with all major central vacuum inlets which have a 1.50” inlet with the exception of a nutone branded inlet which has a slightly smaller opening
- The package features two chrome wands with nylon friction collars to help them stay in place without them wedging together so they can never be separated. A 12” natural fill floor brush and a combination nozzle which is ideal for area rugs door mats. A basic accessory set including a 10” crevice, 4” dusting tool, and 5” upholstery. The mesh caddy bag allows you to collect and store the tools on the hose hanger with the hose in a bag that gives you visibility
- The 91431 is compatible with all major brands of central vacuum including beam, eureka, vacuflo, vacu-maid, imperium, cyclovac, star power, canavac, Hayden, air vac, md, and nutone systems not using the nutone branded square inlet
- Industry standard wall valves and utility inlets on central vacuums that include this feature have the same inner diameter and will accept this hose end. The metal band will activate the low voltage control of your vacuum turning it on as it is inserted
The 91431 is designed to be a general use straight air accessory set for the home, shop, or garage. Often it is used as a second tool set Complimenting the power nozzle or Turbine package that came with the central vacuum. Having a second tool set can save you time and effort moving a tool set from floor to floor in multi-story homes. The hose end is designed for what has historically been industry standard inlets and will activate a system with low voltage contacts in the wall valve. There were a few valves typically produced before 1980 which may use a micro-switch for activation of the vacuum. In most cases the 91431 will still work but the automatic activation of the system will not be delivered by the banded cuff. The set includes a full range attachments for most standard household cleaning jobs. This set is deal for a basement, garage, or general use in the home, especially on hard floor areas. The floor brush is ideal for cleaning hardwood, tile, stone, and vinyl.
4. Bissell Garage Pro Wall-Mounted Wet Dry Car Vacuum/Blower With Auto Tool Kit, 18P03
- 12 Amp Wet/Dry Vacuum: Picks up both wet and dry messes in the garage, car, workshop, etc
- Converts to blower; Cleaning System: Helix System. Suctions up wet and dry debris
- Includes 7 Versatile attachments and accessory bag for cleanup on barefloor, carpeting, upholstery and much more
- 4 Gallon Semi-Translucent Dirt Tank ; Filtration:2 Stage
- Includes Wall Mounting Kit with extra long hose that stretches 32-feet.Reach Extension Tools: Extension Wand
Garage Pro Wet/Dry Vacuum Complete Wall-Mounting System, 18P03
What makes the Garage Pro an especially convenient wet/dry vacuum?
Being able to mount the Garage Pro on the wall gives you more floor space in your garage, and means you won’t have to maneuver around it all the time. Since it has a 32-foot hose, you can still reach inside your car and around the garage with the vacuum mounted on the wall. The 4-gallon dirt tank is semi-translucent and has an LED Full Water Tank Indicator so you won’t have to guess when it needs to be emptied.
The 12-amp motor provides powerful suction for garage cleaning needs, whether you’re vacuuming your car or tidying up the shop. The wet & dry vacuum was engineered to handle spills and messes from liquids to dirt and grime. The blower is ideal for keeping your work area free of debris. Seven all-purpose tools make car detailing a snap. They’re versatile enough to handle just about any task. And you can conveniently store them in the included accessory bag. The wall-mount design conveniently keeps your BISSELL Garage Pro ready for use yet out of the way. The 4 gallon dirt tank is semi-translucent so you can see the level of water and debris in the tank, to empty as necessary.
Did You Know: You can unclog your vacuum if you lose suction?
Try removing clogs in the upper or lower hoses with a rounded broomstick.
Did You Know: Your filters need to be changed regularly?
Many vacuums have more than one filter that needs to be cleaned and/or replaced on a regular basis to keep the vacuum running great. Check your vacuum’s user guide for more information on your specific model.
Canister Vacuum Cleaners
BISSELL canister vacuums are light and easy to maneuver. They’re great for stairs and other surfaces like curtains, upholstery, auto interiors, and more.
A complete cleaning system for your garage, car or workshop
- Wall-mountable with long hose
- Suctions up wet and dry debris
- Includes 7 car detailing attachments
- Use as a vacuum or blower
5. Vacmaster 2.5 Gallon, 2 Peak HP, Portable Wet/Dry Vacuum, VP205
This versatile wet/dry vac comes with a strong 2 Peak HP motor. It’s a convenient size for quick cleanups and stores easily. Use the blower feature to clear unwanted debris or inflate pool toys and inflatable beds. Features a 8 ft. cord with cord wrap, a 4 ft. hose, crevice tool, 2-in-1 utility nozzle, reusable cloth filter and foam sleeve filter.
6. Cen-Tec Systems 90660 Central Vacuum 50 Foot Low Voltage Hose with Button Lock Stub Tube, Ft
- Compatible with major brands of central vac, including beam, no-one, Electrolux, Hayden, vacuumed, aggressor, md, Canavan, cyclonal, Honeywell
- 50 feet of hose length, helping you be able to reach further than with standard hoses
- Made in the USA
- Includes a soft-grip handle with a great ergonomic feel
- High quality, resulting in great suction to go along with the excellent flexibility
The 90660 is an individually packed 50 foot low voltage hose and chrome button Lock stub tube. The hose also features soft grip handle with n style (Xs6) wall end. Our low voltage hoses are high quality, resulting in no kinks and great suction to go along with the excellent flexibility. The hose is silver in color, while the handle is black. This low voltage hose will fit into standard central vacuum inlet valves, providing suction to 1. 25 inch tools, wands, and attachments. Please not that this is a low voltage hose, and will not power electric power nozzles. This will work with standard central vacuum valves, but may not work with non-standard sizing without an adapter.
7. Cen-Tec Systems 50 Foot Extension Hose for Shop and Garage Vacuums
- Features a 50′, flexible commercial-grade crush proof hose with 360 Degree swivel plastic curved handle and the necessary ends to permit you to customize the hose to work with a variety of models
- Can be used at the Full 50 feet or if preferred for your home shop or garage cut to a length that exactly fits your requirements using a common box Knife and re-threading the ends
- The curved end fits all tool Accessories sets designed 1.25Compatible. Using a tape measure or ruler confirm the opening of one of your Accessories to be 1.25, and this hose will be suitable
- Compatible with major garage utility vacuums including the Bissell Garage Pro, Hoover GUV Prograde L2310, Prolux Lite, Prolux Wet-Dry garage shop vacuum, Electrolux model 006218, Vacumaid Garage Vac
- Easily re-threading the different cuffs to fit your vacuum allows for compatibility among many different models and brands
8. Cen-Tec Systems 94192 16 Ft. Hose for Home and Shop Vacuums with Universal Power Tool Adapter for Dust Collection, Silver
- 1. 25″ diameter X 16 foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with 1. 00″ and 1. 50″ internal and external connections for dust collection
- The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting
- Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, a bayonet fitting with a 1″ soft TPE fitting, and a second bayonet with a soft 1. 50″ TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool
- The soft molded TPE fitting measures 1. 00″ on the inner diameter and has four concentric rings to hold firmly to the power tool. For power tools with a female connection the 1. 00″ soft TPE part measures 1. 40″ on the outer diameter. The soft rubber like feel and taper of the fitting insures a positive tool forming fit
- Includes a second bayonet with a soft molded TPE fitting that measures 1. 50″ on the inner diameter with three concentric rings to hold firmly to the power tool even when carrying a substantial flow of debris in the air stream. The fitting measure 1. 90″ on the outer diameter. The soft TPE allows the fitting to form to the shape of the exhaust port off of the selected power tool
- The inner collar and acetal clip ring are designed to fit to tools directly that accept a quick click collar connection. The collar connector is 1. 75″ on the outer diameter with the acetal clip designed to snap into place on power tools fitted for this feature
- Designed to fit all major brands of power tools and work shrouds including Skil Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Kobalt, Porter Cable, Hitachi and Milwaukee Electric
- The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2. 5″ vacuum connection
Cen-Tec Systems’ 94192 is engineered to connect a wide range of major power tool brands to your home shop vacuum for recovery of the debris and dust generated during the use of the power tool, keeping you and your shop clean while protecting you from airborne particulate that can harm your health. The 94192 is designed to be versatile with three unique and tool industry typical connections. The inner collar with durable acetal clip connects directly to most brands of dry wall sanders and other tools generating high volumes of dust or having large debris profiles. A bayonet fitting with 1″ soft TPE molded fitting is perfect for small power tool connections. The smooth 360 degree swivel rotation of the bayonet prevents the hose from kinking or resisting free movement of the power tool. Changing from the 1″ fitting to a 1. 50 soft TPE fitting popular on many chop saws and routers takes only a second using the quick clip system. An air relief is designed into the bayonet fitting to allow adjustment of the air stream at the tool as necessary to prevent tools sealing to the work surface. The 94192 offers a 1. 25″ X 16 foot highly flexible commercial grade vacuum hose with smooth interior to prevent clogs and maximize air flow to the vacuum. The Cen-Tec proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum. Cen-Tec’s 94192 hose is designed to fit all major brands of power tools and work shrouds including Skil Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Kobalt, Porter Cable, Hitachi and Milwaukee Electric. The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2. 5″ vacuum connection. Compares favorably with VAC005.
9. Vacmaster 1-1/4-Inch Turbo Nozzle, V1TN
Compact and lightweight, the Vacmaster Turbo Nozzle Attachment features air-powered rotating-brush technology that helps remove dirt, dust and other nuisance debris, such as pet hair, from the car or around the house. Rotating brush action lifts dirt from mats, carpets and other hard-to-clean surfaces for quicker cleanup. Rubber bristle combs collect and remove unwanted pet hair in a snap. Compact, lightweight design is easy to guide and control in tight spaces of a car, stairs or furniture. Universal fits most Craftsman, Shop Vac and other wet/dry vac brands, as well as most household vacuums with a 1-1/4-inch diameter hose system.
10. Atrix – WWRKPT160 Turbo Beater Bar Brush Omega Series Vacuums
- COMPATIBLE WITH ATRIX OMEGA SERIES VACUUMS – This turbo beater bar brush fits the Omega Series vacuums including models: VACOMEGASLFH, VACOMEGAU, VACOMEGASIPM, VACOMEGASECRH, VACGRNS, VACOMEGAS.
- CAN WORK WITH A WIDE VARIETY OF VACUUMS – The WWRKPT160 handheld turbo brush is commonly referred in the industry as a 1.25″ or 32mm. This accessory has an I.D. of 1.25″ (32mm) and will attach to an extension wand or hose end that is 1.25″ (32mm) or smaller.
- WORKS GREAT FOR ANIMAL HAIR ON COUCHES AND FURNITURE – This Omega vacuum accessory works great with dog, cat and pet hair on couches and other furniture. It works with a sofa cover and bed spread with no bogging or tangling and with lots of suction power.
- USE IT ON CARPET AND HARD FLOORS – Customers have said that this beater bar brush works great on staircases, berber carpet, small low-pile area rugs, ceramic tile, and laminate flooring.
- PERFECT SIZE ATTACHMENT – The Atrix attachment measures 10″ x 3″ 6.5″ which is the perfect size to have an accurate yet wide range of vacuum.
The WWRKPT160 Turbo Beater Bar Brush for Atrix Omega Series Vacuums is the perfect attachment for cleaning up unwanted debris. Pick up hair and other particles. Fits the Omega series vacuums including models: VACOMEGASLFH, VACOMEGAU, VACOMEGASIPM, VACOMEGASECRH, VACGRNS, VACOMEGAS.
Here at Atrix, our mission is to provide quality vacuums with ultra-fine filtration, along with professional services to customers all around the world. We believe in the importance of quality, reliability and service.
Our vision at Atrix International is to be the premier industry manufacturer of vacuums with ultra-fine filtration. Atrix has been in business since 1981. Over the years, we have introduced numerous models of Industrial Vacuums including the Omega Plus, the Green Supreme, the HEPA Express, the High Capacity, IPM (Pest), Abatement and HEPA Backpack Vacuums. As a company, we take pride in producing products of the utmost quality and providing our customers with excellent service. Thanks to these efforts, we have been able to build a strong brand with a reputable name. We are proud to manufacture the finest filtration, ESD Safe vacuums that are available. We are one of the few companies that manufacture patented HEPA and ULPA Filters. We also distribute a wide range of Tools, Complete Tool Kits, ESD Safety Products, Smocks and Cleaning Supplies.
By our suggestions above, we hope that you can found Rv Central Shop Vacuum for you.Please don’t forget to share your experience by comment in this post. Thank you!