![](https://images-na.ssl-images-amazon.com/images/I/51vFblPddOL._SL700_.jpg)
Nowadays, there are so many products of poe cooling fan in the market and you are wondering to choose a best one.You have searched for poe cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings poe cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
539 reviews analysed
1. Linksys Business LGS124P 24-Port Rackmount Gigabit Ethernet PoE+ Unmanaged Network Switch I Metal Enclosure
Feature
- Wired connection speed up to 1,000 Mbps
- 8, 16, or 24 Gigabit Ethernet autosensing ports
- Quality of Service (QoS) traffic prioritization
- Power over Ethernet (PoE+) support. Power Saving Cable connected detection, sleep mode
- Easy plug and play connection.Power input:100–240 VAC, 50/60 Hz
- Note: Model numbers LGS124PV2 inches and LGS124P are same
- 24 port switch with 12 PoE+ ports (ports 1–6 and 13–18) and dedicated PoE power budget of 120 W
Description
Upgrade the data paths of your local wired network to information superhighways with Gigabit switches at the desktop. Accelerate your performance and productivity when you send large fi les to network servers, drives, and printers at Gigabit speed. Power over Ethernet (PoE+) capability also carries electrical power to peripheral devices without the need for additional outlets. Network Standards:IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3az IEEE 802.3af 802.3at (PoE+), One Fan
2. AC Infinity AXIAL LS1238, Quiet Muffin Fan, 120V AC 120mm x 38mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
Feature
- Designed for projects that requires cooling or ventilation
- or as a replacement fan for various products.
- Includes a heavy-duty aluminum fan with power plug cord, two fan guards, and mounting screw set.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- Low Speed: Has a lower noise and airflow rating than high speed models of the same size.
- 120 x 120 x 38 mm (4.7 x 4.7 x 1.5 in.) | 100 to 125V AC | Airflow: 62 CFM | Noise: 32 dBA | Speed: 1800 RPM
Description
Product Description
The heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan’s metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 120 millimeter metal fan guards and a mounting screw set. The AC Infinity axial fan is UL recognized under certificate E503903, and also CE and RoHS certified.
Heavy Duty Construction
The fan’s housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic which have a high resistance to flammability Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction.
Applications
This low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to room doorways, amplifiers, kegerators, and more. Because this is a standard industrial size fan, it can be used to replace fans found in various electronics and machinery.
3. MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement
Feature
- Oil bearing 30000 hours
- Double roller bearing 50000 hours
- Certification: CE,UL,CUL
- Temperature of usage environment: -10℃ to +70℃
- Bearing is high precision, long life and low noise
- Size: 40 mm x 40 mm x 10 mm
- Working Voltage: DC 12V
- Working Current: 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96w
- Cable length: 280mm
Description
4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement
Description:
Size: 40 mm x 40 mm x 10 mm;
Working Voltage: DC 12V;
Working Current: 0.08A;
Air Flow: 5.75±10% CFM;
Power: 0.96w;
Cable length: 280mm;
Certification: CE,UL,CUL;
Feature:
Oil bearing 30000 hours;Double roller bearing 50000 hours.
Temperature of usage environment: -10℃ to +70℃;
Bearing is high precision, long life and low noise
Package Including:
4 * DC 12V 0.08A 40X40X10mm 3D Printing Fan
4. Antrader 12V Brushless DC Cooling Fan for DIY 3D Printer Extruder Humidifier Pack of 6
Feature
- High quality mini brushless 4010 DC 12V fan, sleeve-bearing design cooling cooler.
- Plastic construction 9 blade fan. Dual Ball Bearing
- Speed: 6800 RPM
- Air Flow : 6.86 CFM
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.15A
- 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5
- Compact motor design for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans and so on.
Description
The Best Product to Save Your Time and Money!
Sold as 3 Pieces:
https://www.amazon.com/dp/B07M8RY1WJ
Specifications:
Model: 4010
Rated Voltage: DC12V
Consuming Current : 0.12A(0.15 Max.)
Consuming Power: 1.2W(1.44 Max.)
Connector: 2pin-ph2.5 Rated
Speed: 6800 PRM
Iife Expectance: 67,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: FCC,CE
Acoustic Noise: 18db***
DC Line Length : 120mm Max.
Air Flow: 68.6CFM
Size:40 x 40 x 10mm/ 1.57″ x 1.57″ x 0.39″
Package Content:
6pcs x DC Brushless Cooling Fan
Notes:
1.The colors may have difference as the different display, please understand.
2.Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.
Welcome to our store! Enjoy quality and healthy life! We dare to use the new, heart, innovation to supply the best quality products!
Any problem please feel free to contact us first so that we can supply the best service for you.
5. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
6. Argon NEO Raspberry Pi 4 Model B Heatsink Case | Supports Cooling Fan, Camera, and LCD Display | GPIO and PoE Pins are Accessible
7. AC Infinity AXIAL 1225, Quiet Muffin Fan, 120V AC 120mm x 25mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
Description
Product Description
The heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan’s metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 120 millimeter metal fan guards and a mounting screw set. AC Infinity fans are certified by CE, UL, TUV, and RoHS.
Heavy Duty Construction
The fan’s housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic and meets UL 94 standards for resistance to flammability. Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction.
Applications
This low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to room doorways, amplifiers, kegerators, and more. Because this is a standard industrial size fan, it can be used to replace fans found in various electronics and machinery.
8. iUniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B (Black for 3B+/3B)
Feature
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 30mm Large Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 3 Model B+ / Pi 3B
9. CMC TECH Raspberry Pi Deep Case PoE [email protected] HAT Metal Enclosure Protective Box Cooling Fan 17.5Watt Power Over Ethernet (POE) HAT PoE Network Standard Compliant for Rpi 4 Model B
Feature
- Metal Case (Deep Case) 3.5L x 2.5″W x 1.75″H with 1 mm Powder Coated Thick Steel Construction
- Ball Bearing Fan 5V / 3.3V (More reliable and long lasting than sleeve bearing fan)
- Power over Ethernet ([email protected] 17.5Watt) add-on board (HAT) for the Raspberry Pi 4
- Aluminum CPU Heat Sink
- Require the most common standard IEEE 802.3af or 802.3at compliant POE injector, PoE switch, or PoE router device is required (not included).
Description
CMC TECH Raspberry Pi 4 Model B Metal Enclosure Protective Box Deep Case + Cooling Fan + [email protected] 17.5Watt Power Over Ethernet (POE) HAT IEEE 802.3af or 802.3at PoE Network Standard Compliant. Metal Case (Deep Case) 3.5L x 2.5″W x 1.75″H with 1mm Powder Coated Thick Steel Construction Ball Bearing Fan 5V / 3.3V (More reliable and long-lasting than sleeve bearing fan) Aluminum CPU Heat Sink Power over Ethernet ([email protected] 17.5Watt) add-on board (HAT) for the Raspberry Pi 4 Model B Use this HAT to power a Raspberry Pi via an Ethernet cable, removing the need for a separate power supply, an ideal solution for Pi cluster, embedded and IoT projects. means that the HAT is capable of providing all the power needed for running your Raspberry Pi. Output up to [email protected] (17.5Watt): CMC TECH PoE HAT is capable of providing all the power needed for running your Raspberry Pi with USB storage and other peripherals up to [email protected] (17.5Watt). Unlike most other PoE HAT with output only 5V2A or 2.5A.Compact Low Profile design: Idea for Raspberry Pi Cluster It does not affect the data, so you won’t lose bandwidth by using PoE.For Raspberry Pi 3 Model B+ and Raspberry Pi 4 Model B, Not Compatible with Pi 3 Model B and older.Require the most common standard IEEE 802.3af or 802.3at compliant POE injector, PoE switch, or PoE router device is required (not included).To ensure stable operation, use this product with active air circulation. You will need power sourcing equipment to power your Pi. This is either provided by your PoE network switch or with power injectors on an Ethernet cable. * PoE Hat Only, Raspberry Pi not included.
10. MakerFocus Raspberry Pi 4B POE Hat Power Over Ethernet Hat POE Extension Board Support IEEE 802.3af or 802.3at PoE Standard DC 5V with 30 x 30 x 7 mm Cooling Fan for Raspberry Pi 4B, 3B+
Feature
- User Manual – https://wiki.52pi.com/index.php/Power-Over-Ethernet_(PoE)_HAT_for_RPi_4B/3B%2B_SKU:_EP-0115. Note: Raspberry Pi board is not included!
- Rich Application Scenarios – The module is ideal for any space limited PoE applications such as IP cameras, biometric readers, RFID, wireless access points, HDBaseT extenders, VOIP phones, networked audio etc.
- Easy to assemble – Built-in Cooling Fan and Plug-and-play.
- Perfectly for Using in IoT Based Projects – Its tiny size is suitble for Raspberry Pi 4B and 3B+ in IOT and building automation applications. It is ultimate power solution for Raspberry Pi 4B/3B+.
- Convenient and Cost-Effective – The Power-over-Ethernet (POE Module) allows you to put a DC voltage onto specific pairs of the Ethernet cable so that devices connected to the network can use it as a power source.
Description
Descripition:
The Power-over-Ethernet (POE) hat offers a convenient and cost-effective way to deliver power to your device. It delivers clean and reliable power to PI 3B+ and Pi 4.
Warning:
1. PoE power output must be within the budget of the switch when powering multiple boards!!! STANDARDS COMPLIANT POWER OVER ETHERNET SWITCH REQUIRED!!!
2. The network switch or power sourcing equipment (PSE) must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads.
3. “Passive PoE” (DC 24V or 48V) is not standards compliant and may cause damage to equipment.
4.Do not use this product in an enclosed case without active air circulation!!
Features:
Easy to assemble
Compatible With Raspberry Pi 4B / Raspberry Pi 3B+
Built-in Cooling Fan
Support IEEE 802.3af or 802.3at PoE standard
Specifications:
Input: IEEE 802.3af Compliant PoE
Output: 5V +-5% [up to 2.5A]
Protection Circuitry: Transient Overvoltage, Undervoltage Lockout, Thermal Shutdown, Foldback Current Limiting
Active airflow and adequate cooling required for stable continuous operation at high load.
Weight: 30g
Package Including:
1 * Power-Over-Ethernet (PoE) Hat with 3007 Cooling Fan
3 * M2.5*9+6 Copper Stick
3 * M2.5 Screws
3 * M2.5 Nuts
1 * Aluminum Heat Sink
1 * Screw Driver
Conclusion
By our suggestions above, we hope that you can found Poe Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!