576 reviews analysed
1. Polycarbonate Plastic Sheet 12" X 24" X 0.0625" (1/16") 3 Pack for VEX Robotics Teams, Hobby, DIY, Industrial. Shatterproof, Easy to Cut, Bend, Mold.
2. Polycarbonate Plastic Sheet 12" X 18" X 0.0625" (1/16") for VEX Robotics Teams, Hobby, DIY, Industrial. Shatterproof, Easy to Cut, Bend, Mold.
3. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
4. WIDGETCO 1/4" x 1" Screw Thread Protectors, White – Works w/Many Hurricane Shutters
Description
1/4 inch x 1 inch White Screw Thread Protectors fit 1/4 inch (1/4-20) screws and bolts. Simply slide over the threaded end of the screw or bolt. Functions as a Thread Protector, Mask (for painting), Insulator, Decorator, Seal or to Color Code. Ideal for Hurricane Shutters.
5. SimbaLux Acrylic Sheet Black Opaque Cast Plexiglass 12” x 12” Square Panel 1/4” Thick (6mm) Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut
Feature
- Multipurpose Project Use – These acrylic plexiglass sheets can be used for a range of DIY and professional projects, such as laser engraved signage, kitchen or bath backsplash, wall panel, home décor, shelving, and more.
- High-Quality Grade A Black Finish – Along with improved weather and UV resistance, our opaque (not transparent) black acrylic sheets look visually appealing and it is reflective. Protective paper included.
- Thick Square Frame & Enhanced Durability – SimbaLux®
- heavy-duty plexi glass panels are tougher than standard glass with about 0.25” (1/4 inch) or 5.7mm to 6.3mm (6mm nominal) thickness that offers better indoor and outdoor resilience. Sized at 12 inches by 12 inches, these versatile acrylic plastic sheets can be used as is or cut to suit almost any job.
- Easy to Cut and High-Quality Cell Cast Design – With no melting point, cutting through our thick acrylic boards with a laser, tablesaw, jigsaw, drill, router, or bandsaw is quick and easy. The cell cast version offers clean cut edges without burrs, sharper laser engraving, higher resistance to scratch and chemical solvents.
- 1-Year Warranty – Just send us a message if the product malfunctions before 1-year after the purchase date and we will either refund you or send you a replacement.
6. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)
Feature
- SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
- NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
- INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
- REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor
Description
Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a head
Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 7/8″
Thread Length
The length of the threads on the anchor is in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
7. LENOX Tools 22208C3 3 Blade Crimper
Feature
- For crimping round metal pipe to create a male fitting end.
- Optimal handle span for maximum power and comfortable operating range.
- Crimps heavier gauge pipe.
- Reinforced Chrome Silicone valve-quality wire spring lasts for a lifetime.
- LENOX precision sheet metal fabrication tools are ideal for HVAC projects.
Description
For crimping round metal pipe to create a male fitting end. Optimal handle span for maximum power and comfortable operating range. Crimps heavier gauge pipe. Reinforced Chrome Silicone valve-quality wire spring lasts for a lifetime. LENOX precision sheet metal fabrication tools are ideal for HVAC projects.
8. Plastics 2000 Lexan Sheet – Polycarbonate – .030" – 1/32" Thick, Clear, 12" x 12" Nominal
Feature
- Clear protetive film on **BOTH** sides of sheet. One side has printing. The other side is clear / frosted and hard to see.
- Lexan is one of the manufactures of the material type Ploycarbonate
- High/Low Temperature Resistance
- Thermoformable
- Brand Names For Polycabonate: Lexan, Perspex, Makrolon, Tuffak, Spartech
Description
Polycarbonate sheet combines high impact and temperature resistance with optical clarity and can be utilized for secondary glazing behind existing glazing for economical protection against breakage or intrusion. Polycarbonate sheet can be cut, sawn, drilled and milled by using standard workshop equipment without the risk of cracking and breakage and is therefore an excellent candidate for fabricating a wide range of indoor applications such as machine guards etc. Polycarbonate sheet can be easily thermoformed into complex parts while retaining its excellent properties necessary for demanding applications such as vandal proof street furniture. Polycarbonate sheet may be decorated using a wide variety of modern techniques such as painting and screen printing.
Unlike most thermoplastics, polycarbonate can undergo large plastic deformations without cracking or breaking. As a result, it can be processed and formed at room temperature using sheet metal techniques, such as forming bends on a brake. Even for sharp angle bends with a tight radius, no heating is generally necessary. This makes it valuable in prototyping applications where transparent or electrically non-conductive parts are needed, which cannot be made from sheet metal
Light transmission
Transparent Polycarbonate sheet have excellent light transmission, dependent of thickness between 84 – 87%.
Fire performance
Polycarbonate sheet has good fire behavior characteristics. Lexan sheet does not contribute significantly to the spread of fire or to the generation of toxic gases. For details please contact your local sales office.
9. Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit
Description
Product Description
Ideal for attaching storm panels to wood, concrete and masonry
From the Manufacturer
Ideal for attaching storm panels to wood, concrete and masonry
10. Ekena Millwork LVSL0012WB 3" Lifetime Vinyl Shutter-Lok’s, Wedgewood Blue (12/Bag)
Description
Exterior lifetime vinyl shutter-lok’s are the perfect shutter screws to install your vinyl shutters.
Conclusion
By our suggestions above, we hope that you can found Lexan Hurricane Shutter Panels for you.Please don’t forget to share your experience by comment in this post. Thank you!