The Best Laptop 4 Channel Oscilloscope Adapter

200Mhz, 1Gsa/s, The SDS1202X-E Series employs a new generation of Spo technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It has a minimum vertical input range of 500 UV/Div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400, 000 frames/sec (sequence mode). it also employs a 256-level intensity Grading display function and a color temperature display mode not found in other models in this Class. Siglent’s new oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering. Decoding is standard configuration including IIC, SPI, UART, can, LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1M points FFT math function that gives the sds1000x-e very high frequency resolution when observing signal Spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately. The features and high performance of the sds1000x-e Series cannot be matched else anywhere at this price. Channels 2CH+1EXT, Memory depth :7 Mpts/CH (Dual-Channel); 14 Mpts/CH (Single-Channel)/ data sheet(contains data for product relating to speed)

SIGLENT SDS1204X-E is a dual-channel Super Phosphor Oscilloscope with 200 MHz bandwidth, 1 GSa/s sample rate, and a standard record length of 14 Mpts.

Features
New generation of SPO (Super Phosphor Oscilloscope) technology
Low background noise, supports 500 μV/div to 10 V/div voltage scales
38 automatic measurement functions
Supports Statistics calculations, Zoom measurement, Gating measurement, Math measurement, History measurement, Ref measurement
Waveform math functions (FFT, addition, subtraction, multiplication, division, integration, differentiation, square root)
High Speed hardware based Pass/Fail function
Abundant interfaces: USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Ext Trigger
Supports multi-language display and embedded online help

Technical Specifications

Bandwidth: 200 MHz
Channels: 4
Real-time sampling rate: 1 GSa/s
Memory depth: 14 Mpts/CH (Single-Channel); 7 Mpts/CH (Dual-Channel)
Waveform capture rate: 400,000 wfms/s (Sequence Mode)
Trigger types: Edge, Slope, Pulse, Window, Runt, Interval, Time out (Dropout), Pattern, Video
Vertical resolution: 500 μV/div to 10 V/div
Math Operators: Addition, subtraction, multiplication, division, FFT, differential, integral, square root
FFT processing: 1 Mpts
Decoding: I2C, SPI, UART/RS232, CAN and LIN
Interfaces: USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Ext Trigger
Display: 7” display (800×480 pixels)
Power: AC 100-240 V, 45 Hz – 440 Hz, 50 VA Max

Package Contents
1. SIGLENT SDS1204X-E Super Phosphor Oscilloscope — 1 pc.
2. Passive Probe 1x 10x — 2 pcs.
3. USB Cable — 1 pc.
4. Power Cord — 1 pc.
5. User Guide — 1 pc.
6. CD (Includes User Manual and EasyScopeX software) — 1 pc.

The SDS1000X-E series employs a new generation of SPO (Super-Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/divan innovative digital trigger system with high sensitivity and low jitter, and waveform capture rate of 400,000 frames/sec (sequence mode). The SDS1000X -E also employs a 256 -level intensity grading display function and a color temperature display mode not found in other models in this class. SIGLENT’s latest oscilloscope offering supports multiple powerful triggering modes including serial bus triggering. Serial bus decoding forIIC,SPI,UART,CAN,LIN bus types is included. The X-E models also include History waveform recording, and sequential triggering that enable extended waveform recording and analysis. Another powerful addition is the new1million point FFT math function that gives the SDS1000X -E very high frequency resolution when observing signal spectra. The new digital design also includes a hardware co -processor that delivers measurements quickly and accurately without slowing acquisition and front-panel response. The features and performance of SIGLENT’s new SDS1000X -E cannot be matched anywhere else in this price class. The four channel series includes even more functions, including: searching and navigating, on-screen Bode plot, 16 digital channels(Option), an externals powered 25 MHz AWG module(Option), a USB WIFI adapter(Option),and an embedded application that allows remote control via web browser.

First- use notification! Based on the security of air transport, please open the back cover and connect battery plug manually. Thank you! This oscilloscope is designed according to the research, production, debugging and repair requirements of many electronic engineers. In contrast to traditional oscilloscope is equipped with a built-in lithium battery and can work without external power supply, so it is convenient for carrying, especially for field application. It has three trigger modes- Auto, Normal and Single. You can lock and save the waveform of a non-periodical signal which a traditional oscilloscope can not capture. Performance of Scope Bandwidth (-3dB) ：50MHz Sampling Rate ：Max. real time sampling rate 200MSa/s Channel ：1 Coupling ：AC, DC Rise Time ：≤ 7. 6ns Input Impedance：1MΩ， ≤ 20pF Max Input Voltage ：1x CAT III 300 VAC 10x, 100x CAT III 600 VAC Vertical Resolution ：8 bit Vertical Sensitivity ：10mV/div – 5V/div Horizontal Resolution：2ns/div Horizontal Sensitivity：2ns – 5s Record Length ：4K/channel Memory ：6 memory locations Trigger Mode ：Auto, Normal, Single Trigger Type ：Edge trigger Basic Performance Screen：320×240 pixels (RGB), with LED backlight Communication：USB, PC software Battery ：1 x 3. 7V lithium polymer battery, 4Ah Adapter ： Input Voltage: 100Vac – 240Vac Output ： 5Vdc 10%, 2000mA Operating Environment： Temperature: 0℃ – 40℃ Humidity: ≤ 75% Special Notification: The LED light does not work if the battery is disconnected. Please check whether the battery connects well if they find the LED light does not work when you charge the battery. And the LED light shows red during recharge and shuts off when the battery is charged.