Finding your suitable readers for ice maker hose safety is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ice maker hose safety including detail information and customer reviews. Let’s find out which is your favorite one.
765 reviews analysed
1. Eastman 41033 Stainless steel Icemaker Connector 1/4" Comp x 1/4" Comp x 60" length – Stainless Steel – 12 Pack
Feature
- LENGTH: The line length of this ice maker connector is 5-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel connector makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
Description
Product Description
The Eastman 41033 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 5-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 5′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 5′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
2. Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft
Feature
- Braided stainless Steel ice maker connector
- 1/4 inch fem. x 1/4 inch fcm
- Upc, NSF/ANSI 61 & case certified Certified Appliance Accessories recommends installation of this product be performed by a licensed professional
- 15Ft
- Braided stainless steel
- 1/4 -Inch Comp x 1/4-Inch Comp
- 5 year warranty- From the Manufacturer
Description
Product Description
Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.
From the Manufacturer
Ice Maker Connectors (15-Foot)
3. Certified Appliance IM300SS Ice Maker Connectors, 25-Foot
Description
Product Description
Certified Appliance IM300SS Ice Maker Connector (25 Feet Long), Braided Stainless Steel, 1/4 inch Comp X 1/4 inch Comp
From the Manufacturer
Ice Maker Connectors (25-Foot)
4. Certified Appliance Accessories IM120SS Braided Stainless Steel Ice Maker Connector (10ft)
5. Eastman 60467N PEX Ice Maker Connector 25′ Kit White
Feature
- LENGTH: This icemaker connector hose has a 25-foot tube length
- DURABLE: This flexible supply line resists corrosion
- ADAPTER: The adapter of the icemaker kit consists of (1) 1/4″ OD push-fit x 1/4″ female comp adapter
- (1) 3/8″ female comp x 3/8″ male comp x 1$” OD push-fit add-an-outlet valve
- CONVENIENT: An easy-to-use kit for contractors or home owners
- EASY INSTALLATION: All hardware is included in the kit for an easy installation
Description
The Eastman Icemaker Installation Kit includes everything you need to connect the water supply to your icemaker. The kit includes a 25 ft. roll of PEX tubing that can be cut to length for a perfect fit. The kit includes an adapter as well as an add-an-outlet adapter than can easily connect to copper, CPVC and PEX water lines.
6. Premium Stainless Steel Washing Machine Hoses, 6 Ft Burst Proof (2 Pack) Red and Blue Striped Water Connection
Description
6ft washer hose with red an blue striping, burst proof stainless steel hoses.
7. Little Giant 554425 VCMA-20ULS Condensate Removal 1/30 HP Pump with Safety Switch
Feature
- CONDENSATE PUMP: Little Giant VCMA-20ULS (554425) 1/30HP Condensate removal pump features safety switch, ½ gallon ABS plastic tank and 6ft power cord.
- AUTOMATIC CONDENSATE PUMP: Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required
- LITTLE GIANT PUMP: This vertical-type Little Giant Condensate Pump features stainless steel motor shaft and galvanized steel tank cover. Thermally protected motor is UL and CSA listed. It includes Two 1-1/8” diameter inlet openings
- PUMP WITH SAFETY SWITCH: It includes safety switch can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow. Discharge is a 1/4″ FNPT or 3/8″ O.D. barbed tubing adapter.
- CONDENSATE REMOVAL PUMP: The Little Giant VCMA-15UL is suitable for high-efficiency gas furnace applications that produce an acidic condensate. It has 1-year warranty. Extend the inlet piping into the tank from 1 to 3 inches to ensure that it will not interfere with proper float operation
Description
Product Description
Motor — 1/30 HP
Discharge — 3/8″ OD barbed
Housing/tank cover — ABS
Motor cover — ABS
Volute — ABS
Tank — ABS
Impeller — Glass filled polypropylene
Check valve — Acetal
The VCMA-20ULS has a ½ gallon tank capacity. Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
It is designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
From the Manufacturer
Little Giant VCMA Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required. The VCMA-20ULS features a stainless steel pump shaft, a snap-action pump switch, a removable 3/8 inch barbed check valve, a 6 foot power cord, and a 1/30 horsepower high performance motor with thermal overload protection. The pump also features an ABS tank, ABS motor cover, and ABS volute. With a check valve, the VCMA-20ULS pumps 80 GPH (with a discharge head of one foot). The pump’s tank has a capacity of 1/2 gallon.
8. Eastman 48316 icemaker connector
Feature
- LENGTH: The length of this connector hose is 8-Feet long
- DIMENSION: This supply line connector features 1/8-inch ID (1/4-inch OD) PEX hose
- MATERIAL: This hose is made of high-impact PEX which provides strength as well as includes brass captured nuts
- DURABLE: The PEX material of this appliance connector provides durability which prevents it from kinking making it last longer
- EASY INSTALLATION: This refrigerator ice maker connector is quick and easy to install without hassle
9. Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 2ft
Feature
- 1/4″ FCM (Female Compression) x 1/4″ FCM stainless steel fittings with washers for secure connection
- Braided stainless steel resists punctures, crimping & kinking
- Stainless steel couplings & brass stems provide secure connections
- Clear vinyl surrounds flexible & durable PVC inner core tubing that’s woven with polyester for added strength under pressure
- Lead-free
- UPC (Uniform Plumbing Code), NSF 61 & 372 (National Sanitation Foundation) & CSA (Canadian Standards Association) certified ensures product safety
- Durable design protects against bursting & cracking
- Fits All Refrigerators, Won’t Kink or Crimp in Tight Spaces, Exceeds all Requirements for Flexible Water Connectors, Retail Clamshell Packaged, Meets or Exceeds Industry Certification Standards & Appliance Manufacturer Requirements
- UPC, CSA, NSF/ANSI 61 and NSF 372 Lead-Free Certified, ASM A112.18.6 & CSA B125.6
- 5 year warranty- From the Manufacturer
Description
Product Description
For years, licensed plumbers, electricians and appliance installers have relied on Certified Appliance Accessories for their power cords, hoses and connectors. Now you can too. Enjoy the convenience offered by this ice maker connector from Certified Appliance Accessories. Its flexibility and durability ensure a reliable connection for your next home installation project. This hose has been thoroughly tested and is backed by a 5-year limited warranty. Check your appliance’s manual for the correct specifications to ensure this is the right connector hose for you. Thank you for choosing Certified Appliance Accessories—Your Appliance Connection Solution.
From the Manufacturer
Certified Appliance M62b Ice Maker Connector (2 Feet); Braided Stainless Steel; 1/4 inch Comp X 1/4 inch Comp;1/4 inch Comp X 1/4 inch Comp
10. Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 5ft
Feature
- 1/4″ FCM (Female Compression) x 1/4″ FCM stainless steel fittings with washers for secure connection
- Braided stainless steel resists punctures, crimping & kinking
- Stainless steel couplings & brass stems provide secure connections
- Clear vinyl surrounds flexible & durable PVC inner core tubing that’s woven with polyester for added strength under pressure
- Lead-free
- UPC (Uniform Plumbing Code), NSF 61 & 372 (National Sanitation Foundation) & CSA (Canadian Standards Association) certified ensures product safety
- Durable design protects against bursting & cracking
- Fits All Refrigerators, Won’t Kink or Crimp in Tight Spaces, Exceeds all Requirements for Flexible Water Connectors , Retail Clamshell Packaged, Meets or Exceeds Industry Certification Standards & Appliance Manufacturer Requirements
- UPC, CSA, NSF/ANSI 61 and NSF 372 Lead-Free Certified, ASM A112.18.6 & CSA B125.6
- 5 year warranty- From the Manufacturer
Description
Product Description
For years, licensed plumbers, electricians and appliance installers have relied on Certified Appliance Accessories for their power cords, hoses and connectors. Now you can too. Enjoy the convenience offered by this ice maker connector from Certified Appliance Accessories. Its flexibility and durability ensure a reliable connection for your next home installation project. This hose has been thoroughly tested and is backed by a 5-year limited warranty. Check your appliance’s manual for the correct specifications to ensure this is the right connector hose for you. Thank you for choosing Certified Appliance Accessories—Your Appliance Connection Solution.
From the Manufacturer
Certified Appliance M65b Ice Maker Connector (5 Feet Long); Braided Stainless Steel ; 1/4 inch Comp X 1/4 inch Comp
Conclusion
By our suggestions above, we hope that you can found Ice Maker Hose Safety for you.Please don’t forget to share your experience by comment in this post. Thank you!
