Finding your suitable readers for hp z400 liquid water cooled heatsink kit is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for hp z400 liquid water cooled heatsink kit including detail information and customer reviews. Let’s find out which is your favorite one.
875 reviews analysed
1. HP Z400 Liquid Water Cooled Heatsink Kit 507696-001
Description
HP Z400 Liquid Water Cooled Heatsink Kit 507696-001 Liquid cooling heat sink assembly (single processor)
- For Socket LGA1366 CPU
- Motherboard Mounting Plate NOT Included
INCLUDED ITEM
- 534044-001 Liquid cooling heat sink assembly (single processor) WITHOUT FAN
- 577421-001 Liquid cooling module fan assembly – With support bracket
- Heatsink bracket
2. Easycargo 20pcs Raspberry Pi Heatsink Kit Aluminum + Copper + 3M 8810 Thermal Conductive Adhesive Tape for Cooling Cooler Raspberry Pi 4, Raspberry Pi 3 B+
Feature
- Suitable for Raspberry Pi 4 B, 3 B+, 3, 2, A, B, B+ boards
- Includes 15 pcs black anodized aluminum + 5 pcs copper heatsink
- Thermal conductive adhesive tape backing
- Can be applied with other devices for cooling VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge , Northbridge etc
- Raspberry pi not included.
Description
Includes 15 pieces anodized black aluminum+ 5 pieces copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, 3 , 3 B+ and 4 boards. These pure aluminum (15 pcs) and copper (5 pcs) heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 5 pcs aluminum large heat sink: 0.56 x 0.56 x 0.27 inch (14mm x 14mm x 7mm) (L*W*H); 5 pcs aluminum small heat sink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 5 pcs aluminum heat sink 0.56 x 0.39 x 0.27 inch(14mm x 10mm x 7mm); 5 pcs copper large heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)
3. 60pcs Mini Heatsink Kit, Cooler Heat Sink for Cooling VRM Stepper Driver MOSFET VRam Regulators (8.8mmx8.8mmx5mm) Black
Feature
- ✔black anodized aluminum heatsink， Exquisite workmanship, good heat dissipation, long service life.
- ✔Small in size, light in weight, size: approx. 8.8 x 8.8 x 5mm(L*W*H)
- ✔Weight: 0.03 oz / 0.9 gr per piece
- ✔Can be applied for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips raspberry pi models pi electronics, computers, electrical appliances, and heat dissipation etc.
- ✔60pcs Small Mini Heatsink Kit+1 thermal adhesive.
Description
These heat sinks have profiles which are short enough to fit within the cases. These cooler heat sinks can be applied on small electronics components: VRM, MOSFET, Regulators, VRAM, IC Chips, Stepper Motor Drivers such as those in 3D Printers, Miners, etc.
Material: Black Anodized Aluminum
Size: 0.35 x 0.35 x 0.20 inch / 8.8 x 8.8 x 5mm (L*W*H)
Weight: 0.03 oz / 0.9 gr
60pcs Small Mini Heatsink Kit+1 thermal adhesive.
4. 3D Printer Heatsink Kit + Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling TMC2130 TMC2100 A4988 DRV8825 TMC2208 Stepper Motor Driver Module (22pcs)
Feature
- Can be applied for passive cooling of Stepper Motor Module TMC2130 TMC2100 A4988 DRV8825 TMC2208
- With thermal conductive adhesive tape backing
- Stepper motor driver module is not included
- Dimension: 0.35 x 0.35 x 0.47 inch / 9mm x 9mm x 12mm (L*W*H), Weight: 0.04 oz / 1 gr per piece
- Includes 22 pieces blue aluminum heatsink
Description
22 pieces smallanodized blue aluminum mini-heatsink include thermal conductive adhesive tapebacking for optimum heat transfer and easy installation.
Excellent 3DPrinter heat sinks and Thermal pad: Work well for Can be applied for passivecooling of Stepper Motor Module TMC2130 TMC2100 A4988 DRV8825 TMC2208
5. Gadgeter 10pcs Aluminum Heatsink Cooler Circuit Board Cooling Fin For Raspberry Pi,VGA RAM,IC Chips,Mosfet SCR , With 3M 8810 Heat transfer Peel and Stick Tape
Description
Specification :
10x Aluminum Heat Sinks
10x Thermally Conductive Heat Transfer pads (All Pad Are Not Pre Assembled .Assembly Required)
1 x Gift Cable Ties(charging cable does no include) every unit will receive one extra bonus if you don’t received please contact us we will send you the gift.
If for any reason you are unhappy with any product by GADGETER, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!
6. Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Transistor Semiconductor Devices with 16 Pieces fins 120mmx 100mm x 18mm (1 Piece)
Feature
- Made of high quality Aluminum, good thermal conductivity
- Reduce the risk of hardware failure due to overheating
- Maximize surface area Designed in contact with the cooling air. The 16 pcs fins increase the area of the board and thus provide for greater heat transfer
- Widely use for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.
- Size: 4.7″(L) x 3.93″(W) x 0.7″(H) /120mm(L)x 100mm(W) x 18mm(H). Please make sure that the size of the heat sink fits that of your component
Description
A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device, thereby allowing regulation of the device’s temperature at optimal levels. In computers, heat sinks are used to cool central processing units or graphics processors. Heat sinks are used with high-power semiconductor devices, where the heat dissipation ability of the component itself is insufficient to moderate its temperature.
Specifications:
100% Brand New High Quality
Material: Aluminum
Fins: 16
Size: 4.7″(L) x 3.93″(W) x 0.7″(H) /120mm (L)x 100mm(W) x 18mm(H)
Quantity: 1
Used for : Various mini DC converter circuit board computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.
Package:
1x Aluminum Heat Sink Cooling Fin
Note:
1. Please check the specification table and make sure that the size of the heatsink fits that of your component. Thank You!
2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
7. 40 PCS Raspberry Pi Heatsink Kit by Lanpu, High Performance Aluminum Heatsink for Raspberry Pi B B+ 2 and 3, Heatsink Copper Pad Shims, with Thermal Conductive Adhesive Tape
Feature
- ⭐ Includes 30 pcs aluminum heatsink + 10 pcs copper heatsink
- ⭐ Fits for Raspberry Pi models A, B, B+, 2, and 3 boards, Will fit with most Raspberry Pi cases
- ⭐ Thermal conductive adhesive tape backing. Peel and stick in the orientation with the most airflow.
- ⭐ These heatsinks have good performance on heat dissipation and long lasting.
- ⭐ Can be used with other devices such as the Beaglebone. Raspberry pi not included
Description
40 PCS High Performance Raspberry Pi Heatsink Kit Aluminum Heatsink for Raspberry Pi B B+ 2 and 3,
Heatsink Copper Pad Shims, with thermal conductive adhesive tape
Package Includes:
20 pieces – 8.8mm x 8.8mm x 5mm (0.35in x 0.35in x 0.20in) aluminum heat sinks
10 pieces – 14mm x 14mm x 6mm (0.55in x 0.55in x 0.24in) aluminum heat sink
10 pieces – 15mm x 15mm x 1mm (0.6in x 0.6in x 0.04in) copper heat sink
Supported Boards:
Raspberry Pi models A, B, B+, 2, and 3 boards
Product Features:
40 pieces set of heatsinks for the Raspberry Pi models B, B+, 2, and 3.
Reduces CPU and LAN Temperature in Enclosed and Overclocked Environments.
Heatsinks are with thermal conductive adhesive tape on the back.
Can be used with other devices such as the Beaglebone to cool processors, regulators, etc.
These heatsinks are long lasting and have good performance on heat dissipation.
Notice:
Heatsink kits are small parts, please keep out of the reach of children!
8. Easycargo 30pcs 3D Printer Heatsink Kit + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink for Cooling TMC2130 TMC2100 A4988 DRV8825 TMC2208 Stepper Motor Driver Module (Blue 9mmx9mmx12mm)
Feature
- Includes 30 pieces blue aluminum heatsink
- Pre-applied 3M 8810 thermal conductive adhesive tape backing
- Can be applied for passive cooling of Stepper Motor Module TMC2130 TMC2100 A4988 DRV8825 TMC2208
- Dimension: 0.35 x 0.35 x 0.47 inch / 9mm x 9mm x 12mm (L*W*H), Weight: 0.04 oz / 1 gr per piece
- Stepper motor driver module is not included
Description
30 pieces small anodized blue aluminum mini-heatsink include pre-applied 3m 8810 heat conductive adhesive tape for optimum heat transfer and easy installation.
9. Akust Aluminum Memory Chip Heatsink 0.79×0.31×0.20 Inch Blue 16 PCS
Description
The Akust Aluminum Ramsink Chip Heatsink – 22mm x 8mm x 5mm are perfect for covering your exposed memory chips or other ICs that need additional cooling. These aluminum sinks come with adhesive thermal tape for easy installation and can be used for virtually any situation. These heatsinks are 22mm x 8mm x 5mm and can be used solo or stacked next to each other for larger surfaces!
* Size: 22 x 8 x 5mm / 0.87 x 0.31 x 0.20inch, Aluminum
* Efficient size to install
* For Graphic Card, M/B RAM
* For Memory Module RAM
* Easy installation by adhesive
10. Aluminum Chipset Heatsink Radiator Heat Sink Cooling Fin Silver for CPU LED Power Active Component 40 x 40 x 20mm (2 Pcs) -Kalolary
Feature
- ★WIDELY USED★ Kalolary Pure aluminum heat sink, which is suitable for electronic, computer, electrical facilities, play a cooling effect
- ★FEATURES★ High quality aluminum, light weight and high thermal efficiency. A whole molding, beautiful appearance, novel and lightweight
- ★EASY TO USE★ Easy to install and easy to use. Place this cooling Fin under mobile device to cool them
- ★TIPS★ Use heatsink adhesive glue to install heatsink (Glue is not included). Please check the specification table and make sure that the size of the heat sink fits that of your component
- ★WARRANTY★ 24 hours customer service support.If you are not satified with the item, we will give you a free replacement or refund.Please enjoy your shopping.
Description
Kalolary-Heat sink 40X 40X 20mm Aluminum Cooling Fin.
Used for IC, Diode, Electronic, LED, RAM, CHIP computer’s component heat dissipation,
or anywhere you need a small efficient heatsink.
Description:
Material: Aluminium
Color: Silver
Size: 40 x 40 x 20mm / 1.57′ x 1.57′ x 0.79′(L*W*T)
Plate thickness: 20mm
Tooth slice thickness: 1mm
Tooth spacing: 2.5mm
Tooth piece quantity: 11
Package includes:
2 x Aluminum heat sink module
Note:
√ Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
√ Please allow little differs due to manual measurement
Conclusion
By our suggestions above, we hope that you can found Hp Z400 Liquid Water Cooled Heatsink Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
