Top 9 Dewalt 11Amp Angle Grinder

The DEWALT DWE402 4-1/2″ 11-amp Paddle Switch Angle Grinder features the next generation 11 Amp AC/DC 11,000 rpm motor, which provides the best power to weight/size ratio available (1.8HP). It’s Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool. The oversized brushes provide 2X brush life over previous model (D28402) and the large spiral bevel gear provides long transmission life. This grinder offers a One-Touch guard that allows for 360 degree rotation of the guard with a single action. The Quick-Change wheel release allows tool free wheel removal without need for a wrench. It has a top mounted and protected spindle lock button that maximizes the depth of cut without compromising durability. The uniquely small gripping surface in this power class allows for the best comfort available in this class. It also offers a newly designed side handle which provides excellent ergonomics while oversized threading provides durability. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage and a paddle switch with safety lock-off prevents accidental start up. Matching wheel flanges allow the use of common accessories. Includes: (1) 2-position side handle, (1) 4-1/2″ One-Touch (T27) Guard.

The DEWALT DWE402W 4-1/2″ Small Angle Grinder with Wheel features an 11 Amp AC/DC 11,000 RPM motor which is designed for faster material removal and higher overload protection. The Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents. It has a low profile gear case allows access into tight spaces, along with a Quick-Change wheel release that allows tool free wheel removal without the need for a wrench. A One-Touch Guard allows for 360 degree rotation of the guard with a single action, and a paddle switch with safety lock-off prevents accidental start up. The matching wheel flanges allow the use of common accessories. Includes: (1) Grinder, One-Touch Guard, 2-Position Side Handle, Wrench, 4-1/2″ Abrasive Wheel.

The DEWALT DWE4214 4-1/2″ 11amp Angle Grinder Slide features an 11 Amp AC/DC 11,000 RPM motor designed for faster material removal and higher overload protection. It has a dust ejection system which provides durability by ejecting dust and debris particles that enter the tool through the air intake vents. A low profile gear case allows access into tight spaces, and a quick-change wheel release allows tool free wheel removal. This grinder has a One-Touch guard that allows 360 degree rotation of the guard with a single action, along with a Lock-On slide switch provides increased user comfort in extended use applications. Matching wheel flanges allow the use of most common accessories.

The DEWALT DWE4120 4 1/2″ Paddle Switch Small Angle Grinder has a 9-Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The high efficiency motor provides low operating temps. A featured One-Touch Guard allows for 360 degree rotation of the guard with a single action. The slim, ergonomic body design provides increased comfort in extended use applications and the low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces. This unit also features a Quick-Change Wheel Release which allows tool free wheel removal without need for a wrench. It has a 2-position removable side handle that provides increased comfort and control. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Applications include: Grinding and cleaning up welds, weld and steel surface preparation, sanding metal for various metal fabrication projects. Includes the One-Touch Guard and Hex Wrench.

The DEWALT DWE4012 7 Amp 12,000 RPM Paddle Switch Small Angle Grinder features a 7.5 Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The One-Touch Guard allows for a single action to adjust the guard; no buttons or levers, just turn the guard to position it. A hex wrench replaces spanner wrench, which makes it more user friendly as a hex wrench is found in most tool boxes if lost. Its low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces, and the Quick-Change Wheel Release allows tool free wheel removal without need for a wrench. This grinder has a 2-position removable side handle provides increased comfort and control. It also offers a slim, ergonomic body design that provides increased comfort in extended use applications. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Includes: 2-position side handle, Depressed center wheel, One-Touch Guard, Hex Wrench.

The DEWALT DWE43113 4-1/2″ – 5″ high performance trigger grip Grinder is powered by a 13 amp motor and equipped with the dust Ejection system technology designed to protect the tool from damaging dust and debris that enters through air intake vents. It has a side handle for an alternative grip, along with a 5″ type 27 guard. This Grinder also features a trigger switch with a ‘lock-on’ option the no-load speed at 9000 RPM, with inner and outer flanges. Specs: wheel diameter = 5″, Spindle size = 5/8-11 inches, 1700 max watts out, tool weight = 5.1 lbs. Backed by DEWALT’S 3 year limited warranty. Includes: 1) Grinder, 1) 5″ type 27 guard, 1) side handle, inner and outer flanges.

The DEWALT DWE43116 4-1/2″- 5″ high performance trigger switch Grinder shuts the Grinder off in less than a tenth of a second when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. The dust Ejection system™ technology provides durability by ejecting damaging dust and debris that enter through the air intake vents for extra protection. This unit also comes with 3 different type 27 guards. Specs: 13 amp motor, 9,000 RPM rating, trigger switch, 1700 max watts out, 2.3 HP, tool-free flange system, overload protection, tool weight = 5.7 lbs. Backed by DEWALT’S 3 year limited warranty. Includes: 1) Grinder, 1) side handle, inner and outer flange, 1) 4.5″ type 27 guard, 1) 5″ type 27 guard, 1) 6″ type 27 guard.

The DEWALT DWE4011 eatures a 7.0 amp AC/DC, 12,000 rpm motor, which was designed for faster material removal and higher overload protection. The One-Touch Guard eliminates the need for a tool to adjust the guard location; No buttons or levers, just turn the guard to position it. This unit has a hex wrench which replaces the spanner wrench (a hex wrench is found in most tool boxes if lost). It also features a quick-change wheel release that allows for tool-free wheel removal without need for a wrench. As an added bonus, the two-position removable side handle provides increased comfort and control. To make this tool more versatile, the 5/8-inch-to-11-inch spindle thread accepts a wide range of 4-1/2-inch accessories. You will enjoy working with this slim, ergonomic body design as it provides increased comfort in extended use applications.

The DEWALT DWE4120 4 1/2″ Paddle Switch Small Angle Grinder has a 9-Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The high efficiency motor provides low operating temps. A featured One-Touch Guard allows for 360 degree rotation of the guard with a single action. The slim, ergonomic body design provides increased comfort in extended use applications and the low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces. This unit also features a Quick-Change Wheel Release which allows tool free wheel removal without need for a wrench. It has a 2-position removable side handle that provides increased comfort and control. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Applications include: Grinding and cleaning up welds, weld and steel surface preparation, sanding metal for various metal fabrication projects. Includes the One-Touch Guard and Hex Wrench.