Nowadays, there are so many products of cpu cooling heatsink parts in the market and you are wondering to choose a best one.You have searched for cpu cooling heatsink parts in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cpu cooling heatsink parts which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
845 reviews analysed
1. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement
Feature
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size: 40*40*10mm / 1.57*1.57*0.39in
- Speed: 6000RPM
- Noise: 27dBA
- DC12 / 24V
- Working Current: 0.06A / 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96W
- Cable length: Approx 28cm / 11in.
- ❃❃ Cable connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Great replacement item for your all metal hotends or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Package Including: 4 * 3D Printing Fan. Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
Description
This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.
Specification:
Rated Voltage: DC 12V
Consuming Current: 0.08A
Connector: 2pin-ph2.5
Speed: 6000 + -10% RPM
Air Flow: 6.5 CFM
Static Pressure: 2.9
Noise Level: 27dBA
Note: Any questions, you can contact us and we will give you a satisfied solution!
Notice!!!
Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.
2. Nbparts New Original for Lenovo ThinkPad X1 Yoga X1 Carbon 4th CPU Cooling fan Heatsink 00JT800 01AW976
Description
Condition:New condition without original box shipping
Fit for Lenovo ThinkPad X1 Yoga,X1 Carbon 4th
FRU: 00JT800
Sub-FRU: 01AW976 00JT800 01YT252
Package Content: 1 pcs CPU Cooling Fan
Check the Picutre or PN before buy this item,what you see is what you get!!!
3. Intel i3/i5/i7 CPU Cooling Fan (Socket LGA 1155) Part#E97378
Description
Intel CPU i3/i5/i7 Cooling Fan for Socket LGA1155, E97378
4. Thermaltake UX100 5V Motherboard ARGB Sync 16.8 Million Colors 15 Addressable LED Intel/AMD Universal Socket Hydraulic Bearing 65W CPU Cooler CL-P064-AL12SW-A
Feature
- [Support 5V RGB sync enabled motherboards] – Sync with 5V RGB enabled motherboards from as US, ASROCK Gigabyte and MSI to customize lighting effect
- [Build-in ARGB LED] – 15 High lumen addressable LEDs with 16 8 million colors
- [High volume airflow Design] – 9 High air-flow Blade generate a large volume of air passing through the aluminum heatsink for steady air flow and cooling quality
- [Reliable hydraulic Bearing] – self-lubricated Bearing and friction-reducied substance lowers operation noise and enhance thermal efficiency
- [Universal Intel/AMD Socket] – hassle-free installation with all-in-one back plate to be compatible with all latest Intel and AMD CPU Sockets
- [Compatible Sockets] – Intel LGA 1156/1155/1151/1150/775 & AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
- 2 year Warranty
Description
Thermaltake UX100 a RGB lighting CPU cooler features 9-high Air flow blade, hydraulic bearing, and 16.8 million colors of 15 a RGB LEDs that is ready to sync 5V RGB enabled motherboards from Asus, as rock, gigabyte and MSI. Switching the customized lighting effect easily and get the ultimate gaming experience.
p/N: cl-p064-al12sw-a
Compatibility:
intel LGA 1156/1155/1151/1150/775
amd AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
heatsink Material: Aluminum fins
fan Dimension: 120 x 120 x 25 MMF x W x H)
fan Quantity: 1PCs
fan speed: 1800 RPM
rated voltage: 12V
start voltage: 6.0 V
rated current: 0.35 a
power input: 4.2 W
Air flow: 38.82 CFM
Air pressure: 1.48 mm-H2O
acoustical noise: 26.92 dBA
life time/fan life time: 30, 000 hours
pin connect: 5V RGB header – 3pin, 2510 – 3pin
5. Cooler Master MasterLiquid LC240E RGB Close-Loop AIO CPU Liquid Cooler, 240mm Radiator, Dual Chamber RGB Pump, Dual MF120R RGB Fans w/ RGB Lighting Sync for AMD Ryzen/Intel 1151/2066
Feature
- Liquid Cooling System:The Cooler Master LC240E delivers efficient cooing with our dual pump 120 millimeter fans
- It keeps your system running effectively, even in the high load times
- Air flow: 66.7 CFM
- Noise level:31.5 decibels
- Dual Chamber: Our low profile dual chamber pump delivers sizable performance leaps over last gen technology
- 120 millimeter fans: Silent cooling at an efficient rate
- Sleeved tubing reinforced FEP tubbing TO keeps the tube kink free and the liquid flowing to your CPU
- Rgb Controller: allows you customize colors and light effects
- CPU Socket Support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1
Description
The LC240E RGB incorporates Cooler Master’s Dual Chamber Pump, 120mm Fan, and RGB Controller to control the lighting effects. With its matt black styling, braided cabling and RGB lighting effects, the LC240E RGB is a Cooler Master original design and enables a colorful and great performing entry into liquid cooling. Reliability, performance and quiet operation are ensured by its unique Dual Chamber Pump and twin 120mm fan design. Whether you’re building new or just upgrading, it’s easy to install on the latest Intel or AMD systems and 240mm radiator fits many performance PC chassis.
6. Corsair Dominator Platinum Airflow RGB LED Memory Fan Cooling CMDAF2
Feature
- NOTE: Works only with Dominator Platinum kit. High airflow, quiet operation, outstanding reliability
- Personalize system by matching other LEDs or color themes
- Personalize the LED colors in 16.8 million values
- Control fan speed through Corsair Link software (require Corsair Commander Pro). Cooling accessory socket support AMD: AM4, AM3, AM2, FM2, FM1
- Easy Installation and fit on most motherboards.Compatible Corsair Liquid Coolers:H45
7. PartsCollection Cooling Fan for HP Pavilion 500-023w/570-p020 Desktop PC
Description
CPU Heatsink cooling fan for HP Pavilion 500-023w / 570-p020 / 570-p022 / 570-p041
8. Arctic MX-4 – Thermal Compound Paste for Coolers | Heat Sink Paste | Composed of Carbon Micro-Particles | Easy to Apply | High Durability – 4 Grams (1 Pack)
Feature
- [BETTER THAN LIQUID METAL]: Composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated efficiently.
- [SAFE APPLICATION]: The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards.
- [HIGH DURABILITY]: In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years.
- [EASY TO APPLY]: With an ideal consistency, the MX-4 is very easy to use, even for beginners.
- [THERMAL COMPOUND]: Formula, the MX-4 guarantees exceptional heat dissipation from the components and supports the stability needed to push your system to its limit.
Description
Thermal Compound for All CoolersEasy to ApplyWith an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.Safe Application:It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.High Durability :In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years. Value for MoneyA high performance thermal compound perfect for system builders, there’s no suprise that the MX-4 exceeds your expectations for its low price tag. Thermal Conductivity 8.5 W/(mK) Viscosity 870 poise Density 2.50 g/cm³ Volume Resistivity 3.8 x 1013 Ω-cm
9. Intel i3/i5/i7 LGA115x CPU Heatsink and Fan E97379-003
Description
Intel HEATSINK AND FAN FOR i5, COPPER AND ALUMINUM,
10. PartsCollection AM4 Retention Bracket & AM4 Back Plate (for AM4’s Heat Sink Cooling Fan Mounting)
Description
AM4 Retention Bracket & AM4 Back Plate (for AM4’s Heat Sink Mounting). AMD CPU Fan Bracket Base for B350 X 370 X470 AM4 Socket 3pcs Version 90x54mm Mounting Hole Distance with 4 Screws
Conclusion
By our suggestions above, we hope that you can found Cpu Cooling Heatsink Parts for you.Please don’t forget to share your experience by comment in this post. Thank you!