Nowadays, there are so many products of cpu cooling fan for dvr’s in the market and you are wondering to choose a best one.You have searched for cpu cooling fan for dvr’s in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cpu cooling fan for dvr’s which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
752 reviews analysed
1. Replacement Heatsink Fan for DaHua DVR CPU Fan,Heatsink Fan for DaHua DVR CPU Fan,HDCVI Camera Fan,HD DVR Motherboard BGA Cooler Fan，5V DAHUA Fan with 2 Wire 2 Pin
Description
Feature
Voltage:5V
2Wire 2Pin
Package:
1 * DaHua DVR HDCVI Camera Fan
2. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement
Feature
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size: 40*40*10mm / 1.57*1.57*0.39in
- Speed: 6000RPM
- Noise: 27dBA
- DC12 / 24V
- Working Current: 0.06A / 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96W
- Cable length: Approx 28cm / 11in.
- ❃❃ Cable connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Great replacement item for your all metal hotends or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Package Including: 4 * 3D Printing Fan. Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
Description
This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.
Specification:
Rated Voltage: DC 12V
Consuming Current: 0.08A
Connector: 2pin-ph2.5
Speed: 6000 + -10% RPM
Air Flow: 6.5 CFM
Static Pressure: 2.9
Noise Level: 27dBA
Note: Any questions, you can contact us and we will give you a satisfied solution!
Notice!!!
Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.
3. Cooler Master Hyper 212 Evo (RR-212E-20PK-R2) CPU Cooler with PWM Fan, Four Direct Contact Heat Pipes
Feature
- Well-balanced cooling performance provides fin optimizations with perfect balance between high and low speed operations
- 4 Direct Contact heat pipes with the patented CDC(Continuous Direct Contact) technology – creating a perfect, sleek surface for heat conduction,Fan Rated Voltage:12V DC,Fan Noise Level:9 – 36 dBA
- Wide-range PWM fan with unique wave-shaped blade design for excellent airflow. AM4 bracket available through Cooler Master USA
- Fan Dimensions: 4.7 x 4.7 x 1 inches. Heat Sink Dimensions: 4.6 x 2.0 x 6.3 inches. Fan Speed: 600 – 2,000 RPM (PWM) ± 10%
- CPU Socket: Intel LGA 2066 / 2011 / 1366 / 1156 / 1155 / 1151 / 1150 /
- AMD AM4 / AM3+ / AM3 / AM2 / FM2+ / FM2 / FM1 socket
- Well-balanced cooling performance provides fin optimizations with perfect balance between high and low speed operations.
- 4 Direct Contact heat pipes with the patented CDC (Continuous Direct Contact) technology – creating a perfect, sleek surface for heat conduction.
- Wide-range PWM fan with unique wave-shaped blade design for excellent airflow.
- Versatile all-in-one mounting solution supporting the Intel: LGA 2011, 1366, 1151, 1150, 1155, 1156, 775,AMD: FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2, AM1.
- Fan Dimensions:120 x 120 x 25 mm (4.7 x 4.7 x 1 in).
- Heatsink Dimensions: 116 x 51 x 159 mm (4.6 x 2 x 6.2 in).
4. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
5. ANVISION 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12
Description
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)
Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
6. PLUSPOE DC 5V USB Brushless Cooling Fan, 40mm x10mm, Dual Ball Bearing Quiet Operation w/Speed 6800 RPM
Feature
- Rated Voltage: 5V DC, Current: 0.2A
- Airflow: 7.52CFM, Speed: 6800RPM, Noise: 26 dBA
- Bearing Type: Dual Ball Bearing
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright
- Lead Wire: USB, length: 500mm/19.68inch
- USB plug can power the fan through USB ports found behind popular AV electronics and game consoles.
Description
Package Included: 1 x USB DC brushless fans.
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 9 Blades (Provide Bigger Airflow than 7 Blades), Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Rated Voltage: 5V DC
Operating Voltage Range: 4.5-5.5V DC
Start-up Voltage: 3.5V DC
Rated Current: 0.08A (0.20A Max.)
Rated Power: 0.40W (1.0W Max.)
Rated Speed: 6800RPM
Air Flow: 7.52CFM
Air Pressure: 2.98mmH2O
*Noise Level: 26 dB(A)
Conform to RoHS: Yes
Safety Approvals: CE FCC ROHS
Life Expectancy: 67000H at 25degree test
Net Weight: 18.7g
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
7. Antrader 4010 24V 2 Pin Brushless DC Cooling Fan 40 x 40 x 10mm for DIY 3D Printer Extruder Humidifier 6-Pack
Feature
- High quality mini brushless 4010 DC 24V fan, sleeve-bearing design cooling cooler.
- Plastic construction 9 blade fan. Dual Ball Bearing
- Speed: 6800 RPM
- Air Flow : 6.86 CFM
- DC Brushless Cooling Fan, Rated Voltage: DC 24V, Current: 0.12A
- 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5
- Compact motor design for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans and so on.
Description
The Best Product to Save Your Time and Money!
Specifications:
Model: 4010
Rated Voltage: DC24V
Consuming Current : 0.12A(0.15 Max.)
Consuming Power: 1.2W(1.44 Max.)
Connector: 2pin-ph2.5 Rated
Speed: 6800 PRM
Iife Expectance: 67,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: FCC,CE
Acoustic Noise: 18db***
DC Line Length : 120mm Max.
Air Flow: 68.6CFM
Size:40 x 40 x 10mm/ 1.57″ x 1.57″ x 0.39″
Package Content:
6pcs x DC Brushless Cooling Fan
Notes:
1.The colors may have difference as the different display, please understand.
2.Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.
QUALITY GUARANTEE: If there is any quality problem, please feel free to contact us. Refund or Replacement for any quality problem.
8. Coolerguys Quiet AC Powered Receiver/Component Cooling Fan Kits (120mm)
Description
Silent and simple, just plug in and place on or near the component that needs cooling, uses standard 110v AC 2 prong outlet for power but uses a reliable yet quiet DC fan.
Comes with (4) rubber feet to keep the fan from moving and scratching components.
Help prevent your receiver, dvr, console or other component from overheating which can lower life expectancy.
As always all of our parts come with a 3 year replacement warranty, the fan uses dual ball bearings which have a 50,000 life expectancy @ 40C (104F) which equates to nearly 6 years of continuous usage
Fan has 12″ tail, power supply has 48″ so you can place the fan upto 60″ (5ft) away from the AC outlet
Includes:
Coolerguys Ultra Quiet 120x25mm 5 Volt Fan with 4pin Connector : 840556087908
(4) Adhesive backed rubber pads : 840556096917
CG 110V AC to 5V DC Power Supply with 4 Pin Molex (500mA) 4ft power cord: 840556087885
(4) Nylon Multi-Purpose zip ties Black
Fan Specifications:
Dimensions 120x120x25mm
Voltage: 5VDC
Current: 0.23A / 1.15W
Max Static Pressure: 1.85mmH2O
Connector: 4 pin
RPM: 1200 +/- 10%
Air Volume: 45.2 CFM
dB: 19.7
Bearing: Dual Ball
Life Hours: 50,000 @ 40C
Tail is 12 inched wrap sleeved 2/wire.
Not compatible with our thermal control units
9. Cooler Master RR-212X-20PM-A1 Hyper 212X CPU Cooler with Dual Fan (2) x 120 mm
Description
Cooler Master Hyper 212X Processor cooler – (for: LGA775, LGA1156, AM2, AM2+, LGA1366, AM3, LGA1155, AM3+, LGA2011, FM1, FM2, LGA1150, LGA2011-3, LGA1151, AM4) – aluminum – 120 mm – gray, black
10. ELUTENG 120mm Fan 12V with Power Adapter, Ventilation Fan with 3 Speed Control Cooling Blower Compatible for Receiver, Router, Laptop, DVR, Playstation, Computer Cooling
Feature
- 【12V cooling fan】12V 1A 120mm fan with speed switch, the wind is stronger. ***NOTE: The higher the wind speed, the louder the noise
- if a quiet environment is required, adjust the speed to a low level.
- 【3 Speed】3 speeds of wind speed control to meet your different needs. Air volume: 53/64.5/82.6 CFM
- Speed: 1500/2000/2500 RPM.
- 【More Stronger Wind】7 blades maximize airflow, the speed can reach up to 2500RPM, and the air volume can reach 82.6CFM. Suitable for cooling PC / laptop / TV box / receiver / AV cabinet / PS4 / projector / router.
- 【Charge and Play】12cm ventilation fan power supply by 12v 1a power adapter, powerful wind, plug and play, very convenient.
- 【Fully Protection】Square Air fan with Metal grill on both sides, protect your hands, and keep cable without damage by blade of ventilation fan. Please feel free to contact us with any questions.
Description
ELUTENG 120mm Ventilation Fan
Equiped with 3 – Speed Controller
Allow you to set fan’s airflow and noise level.
High Speed: 2500RPM, 38.5dBA
Medium Spepd: 2000RPM, 33dBA
Low Speed: 1500RPM, 29dBA
Choose the right speed according to different needs, small size, bring more convenience to your life.
Note: The higher the wind speed, the louder the noise; if a quiet environment is required, adjust the speed to a low level.
Specifications:
Application equipment: PC / laptop / TV box / receiver / AV cabinet / PS4 / projector / router
Power: 12V 1A power adapter
Parameter (L / M / H):
Air volume: 82.6 / 64.5 / 53 CFM
Speed: 2500 / 2000 / 1500 RPM
Noise: 29 / 33 / 38.5 dB
Voltage: 6 / 9 / 12 V
Current: 0.13 / 0.2 / 0.27 A
Size: 12cm * 12cm * 2.5cm
Line Length: 100cm
Package Contents:
12cm Cooling Fan * 1
12V 1A Power Adapter * 1
Screws * 1
Conclusion
By our suggestions above, we hope that you can found Cpu Cooling Fan For Dvr’s for you.Please don’t forget to share your experience by comment in this post. Thank you!
