935 reviews analysed
Rank
Product Name
Score
1. OTC 5613 Vacuum/Pressure Gauge Kit
Feature
- Ideal for testing vacuum lines and components
- Accurately tests low-pressure fuel systems
- Quickly diagnose internal engine problems such as bad rings valves and leaking head gaskets
- Kit comes complete with adapter for most applications
- Pin point hard to find problems such as cracked lines PCV fuel pump fuel filters and more
2. 8milelake Fuel Pump & Vacuum Tester Carburetor Valve Pressure Tester Gauge Kit Car Truck
3. ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, Vacuum Test
Feature
- DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems
- Set includes a variety of adapters suitable for most vehicles
- Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)
- 4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test
- When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor
- Steady, regular drop indicates that the valve is held open, burnt, or chipped
- Wide pressure fluctuation at high speeds indicates a weak valve spring
- Steady drop to zero pressure indicates a choked muffler
- EASY TO USE: Assembly and operating instruction manual included
- Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip
- Extra-long rubber hose and 14mm/18mm manifold adapter
- Rubber hose 40 PSI (2.8 Bar) maximum working pressure
- Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSIG (0-0.7 kg/cm²) pressure
- EASY STORAGE: Heavy-duty 12.75” x 2.25” x 7.25” inch (32.4cm x 5.7cm x 18.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
- PACKAGE CONTENTS: Package includes (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-27 female brass adapter, (1) 1/8”-27 male to 7/32” barbed brass fitting adapter, (1) 1/8”-27 female to 3/8” male brass adapter, (1) T-type 7/32” barded brass fitting adapter, (1) carrying case, and (1) instruction manual for your convenience
4. Lisle 20300 Vacuum Gauge and Fuel Pump Tester
5. ALPHA MOTO Vacuum Carburetor Synchronization Synchronizer Calibrating Carb Sync Gauges 2 Cylinder Compatible For Motorcycle Bike Honda CB CL 350 XS650 5mm 6mm Adapters
Feature
- This vacuum gauge set features 2 precision gauges,Each gauge has its own individual damping control and Calibration Control
- This is upgraded version, it comes with a case and it also contains both 5mm and 6mm adapters for Honda, Suzuki, Yamaha
- it contains 1 qty x 180mm(M5xP0.8) Brass Extension and 1 qty x 65mm(M5xP0.8) Brass Extension and 1 qty x 180mm(M5xP0.8) Brass Extension
- and 1 qty x 180mm (M6xP1.0) brass extension and 1 qty x 65mm (M6xP1.0) brass extension
- Each gauge has Logo “Alphamoto” on the gauge face.
6. P1 Tools Motorcycle Vacuum Carburetor Synchronizer Carb Sync Gauge 2 Cylinder
Feature
- Vacuum gauge carburetor synchronizing tool for 4 cylinder bikes
- Each gauge has its own individual damping control and Calibration Control, Can be Callibrated to 0.
- The gauge is universal tool, it only contains 5mm adapters for Honda, Suzuki, buyer needs to buy 6mm adapters for yamaha.
- Each gauge has its own individual damping control and Calibration Control
- Set includes 2 in 1 screwdriver.
7. XMT-MOTO Motorcycle Fuel Vacuum Carburetor Synchronizer carb sync Gauge Fit Honda Yamaha
Feature
- Aftermarket Parts 100% Brand New
- Each 2″ gauge features 0-76cm/hg readings, shut off valve and all hardware is high brass finish for longer life,higher corrosion resistance and better flow accuracy.
- Air flow control is handled by needle and seat valves instead of knobs. This helps to resist the dial indicator “bounce” associated with many other lower quality gauges. Set comes complete with red mold storage case.
- This kit lets you synchronise the values of the 4 carburettors as well as adjust/set them.
- With always fast and free shipping on every order,focusing on Quality and Service,so you can shop with confidence
Description
Please Ensure Your Motorcycle is in the our compatibility.
Fuel Vacuum Carburetor Synchronizer Set kit For Motorcycle
Features:
- Each 2″ gauge features 0-76cm/hg readings, shut off valve and all hardware is high brass finish for longer life,higher corrosion resistance and better flow accuracy.
- Air flow control is handled by needle and seat valves instead of knobs. This helps to resist the dial indicator “bounce” associated with many other lower quality gauges. Set comes complete with red mold storage case.
- This kit lets you synchronise the values of the 4 carburettors as well as adjust/set them.
- Condition: 100% Brand New
- Color: As Picture Showed
- High Class Quality And Very Durable
Fitment:
- Universal Fit
Package Included:
- – 4 pcs3-1/2″ synchronizer gauges with fixed plate (vacuum)
- – 4 rubber pipes 8x5x750mm
- – 4 Tubes of extension 3.9x52mm and 4 tubes 3.9x122mm
- – 8 Tubes of conical type connector 8x40mm
- – 4 Tubes 10x53mm ( M6x0.75)
- – 4 Tubes 10x60mm ( M6x1.0)
8. ALPHA MOTO Universal Motorcycle Vacuum Carburetor Synchronizer Synchronization Balancer Carb Sync Balancing Gauge Compatible with Honda Yamaha Kawasaki Suzuki GS KZ XS CB 550 650 750 850 900 BWM
Feature
- This vacuum gauge set features 4 precision gauges.
- Each gauge has its own individual damping control and Calibration Control
- Gauges are mounted to a heavy metal base intended for bench top use.
- It comes with both 5mm and 6mm adapters, will work with all bike models includes Yamaha which requires 6mm adapters
- Conditon:100% Brand New
9. Prokomon 2 Carburetor Carb Vacuum Gauge Synchronizer Synch Guage Set Cylinder Synchronisation Balancing Motorcycle PT1868
Description
Specification:
Condition:100% Brand New
Product Name: Motorcycle Vacuum Gauge Balancer
Material: Metal & Plastic
Shell Color: Blue
Lens Color: Transparent
Diameter: 7cm / 2.75″
Height: 2.8cm / 1.1″
Quantity: 2pcs
Fitment:
Universal For Motorcycle
Features:
– High Class Quality and Very Durable
– Each gauge has damping control and calibration control
– Easy to install
– Excellent quality vacuum gauges enable easy synchronisation and balancing of motorcycle carburettors
Package Includes:
2 x Motorcycle Vacuum Gauge Balancer
Conclusion
By our suggestions above, we hope that you can found Carb Vacuum Gauge for you.Please don’t forget to share your experience by comment in this post. Thank you!
