670 reviews analysed
1. WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM)
Feature
- Circulate the air in a 400 square foot room up to 7.5 times per hour
- Three-speed operation flows air at a rate of 300, 350, or 400 cubic feet per minute
- Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced
- Programmable timer automatically shuts unit off after set number of minutes
- Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away
Description
Remember when your workshop was full of clean air? Air-borne dust particulates can dirty up a woodworker’s workshop and harm a healthy respiratory system, but with the WEN 3-Speed Remote-Controlled Air Filtration System, you no longer need to worry. This system eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The powerful 1/6 HP motor leaves no stone unturned, collecting every contaminant in its path. Quiet system creates 50 to 60 dB of noise and is controllable up to 26 feet away with the included remote. The lightweight design weighs in at a mere 31 pounds. Combine this with the attached carrying handle and eyebolts for easy mobility, mounting and installation. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter and a 1-micron inner filter. Easily switch between three speeds of 300, 350 and 400 cfm depending on what the situation calls for. With the time feature, you don’t even have to worry about turning off your machine. Simply set the timer and the machine will turn off on its own once the time runs out, allowing you to easily give your workshop a thorough cleanse at the end of a day of woodworking without having to be present. And because this is a WEN Product, your 3-Speed Remote-Controlled Air Filtration System is backed by a two-year warranty, a helpful customer service phone line, and a nationwide network of experienced technicians. Remember when you could breathe easy in your workshop? Remember WEN.
2. Cen-Tec Systems Vacuflo Turbocat Central Vacuum Air Turbine Brush, Gray
Feature
- No Batteries or additional power needed
- Runs off your Central Vacuum
- The make-up of the TurboCat turbine allows for enhanced airflow and constant contact with the floor surface
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- This model is gray in color
3. FEIN Turbo I Vacuum Cleaner, 5.8 Gallon, 1100W | Includes: 13 ft Suction Hose, Tool Coupling with Suction Power Control, Cellulose Filter, 1 Fleece Filter Bag
Feature
- Auto-Start Vacuum for power tools-allows your vacuum to turn on automatically!
- Powerful suction with 98.4″ of static water lift. Tool coupling with suction control for easy control of suction power
- On board storage for cord and accessories
- Long hose (13′) and cord (18′) for ease of use
- By-pass cooling for long life of vacuum
Description
Fein Turbo 1 vacuum with 5.8 gallon tank which includes an Auto-start wet dry vacuum. Powerful 1100 watt by-pass motor is ideal for the job site or DIY use. An integrated power tool socket with automatic start/stop function ensures that the extractor starts after a power tool has been switched on. 66 DB noise level. Air flow rate 151 CFM ensures a high air flow to pull up everything! Bypass motor allows for the dirty air that comes from the hose never to come into contact with the motor. This eliminates dust spewing out from the motor when you turn the vacuum on and a very long life of the product. Simply said what goes in the vacuum stays in the vacuum. Filter guard for flat fold filter if the filter is dirty, the dirt can simply be tapped out of the filter cassette without the flat fold filter being damaged, The protective filter cassette means that there is no need to replace the cellulose filter for wet extraction. Long 13′ ft. hose and 18′ ft. cord for long reach allows you to be 54′ ft. from the outlet.
4. Makita 18V LXT Lithium-Ion Cordless Vacuum
Feature
- Up to 15 minutes of continuous use from a single fully charged 18V compact Lithium-Ion 2.0Ah battery
- Redesigned floor nozzle for improved maneuverability and debris collection
- Strong suction power for fast and efficient cleaning
- Bagless 2-stage cloth filtration system allows for easier cleaning and quicker debris disposal
- Increased storage capacity for longer time between waste disposal.Only use genuine Makita batteries and chargers
- Weighs only 2.7 Pounds. with battery for reduced operator fatigue
Description
The Makita 18V compact Lithium-Ion cordless vacuum kit, model XLC02R1B, is a compact and powerful cordless vacuum with strong suction for fast and efficient cleaning. At only 18-3/4” in length this compact vacuum can be used as a “hand-vac”, or with the floor nozzle extension for floors, carpets, and hard-to-reach spaces. The XLC02R1B is a kit and includes the fast-charging 18V compact Lithium-Ion battery and efficient Rapid optimum charger. It’S part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.
5. Air Power America 5060TS Topsider Multi-Purpose Fluid Removing System
Feature
- Easy to use
- powered by vacuum pressure – no electricity needed
- Quickly extracts old oil through the dipstick tube into the 8 quart container
- Wide 12 inch diameter stance provides a stable base – eliminating any potential spills
- Portable – easy to operate in confined spaces
- No mess from spills or inconvenient drain plugs – used oil and other liquids are stored safely for proper disposal
Description
The Topsider’s reliability and convenience has long been trusted by boaters for easy, no mess oil changes, and other marine and automotive maintenance applications. No electricity required, the Topsider multi-purpose vacuum pump-out system uses a vacuum to pull oil out of your crankcase. A 12 inches diameter stance provides a stable base, eliminating potential tip-overs and spills, simply slide the withdrawal hose down your dipstick hole, open the valve and wait for 8 to 10 minutes. All of your old oil will be drawn into the Topsider’s 8 Quart container. Very easy to use, suction probe and instructions included.
6. BLACK+DECKER Handheld Vacuum 2Ah, Power White (HNV220BCZ10FF)
Feature
- Designed for quick + easy cordless cleaning
- Ideal for quick clean ups and spills
- Lightweight + portable design makes this easy to use
- Included charging wall mount and base allows for 1 step charging and storage
- The translucent, bagless dirt bowl makes it easy to see the dirt level and is easy to empty
- Included brush lets you use the vacuum for dusting + on upholstery
Description
For cordless cleaning, this easy-to-use and easy-to-clean cordless vacuum kit gets it done. The kit includes a crevice tool and upholstery brush for all your pick-ups. And everything stores out of the way on the wall-mount charging station.
7. Arm & Hammer Pet Fresh Carpet Odor Eliminator Plus Oxi Clean Dirt Fighters (Pack of 3), 54 Ounce
8. Cen-Tec Systems 91255 Commercial Cleaning Kit with 2-Piece Aluminum S-Wand and Vacuum Tools, 14-Inch
Feature
- The two piece anodized aluminum wand has a locking feature to keep the section together during use. The ABS compression collar is designed to accept either 1 ½” or 1-9/16” floor nozzles
- Unlike cheaper carpet tools the wide base prevents the tool from digging into plush carpet requiring less effort and user fatigue
- The window cut of the floor brush opens the face of the tool to improve pick-up and better utilize the air flow from high performance back pack vacuums
- Designed for new or replacement of the three most commonly required back pack vacuum accessories
- Compatible with major brands of back pack vacuums equipped with 1 ½” hose including Pro-Team, Sandia, Power Flight, Mosquito, Carpet Pro, Tennant, Perfect, Bissell, Sanitaire, Hawk, and Mercury
Description
Pro, Tennant, Perfect, Bissell, Sanitaire, Hawk, and Mercury. The set includes a 14” commercial carpet-multi-surface nozzle with nylon brush strip. A 14” nylon fill hard floor brush with wrap around non-marring bumper, and a two piece anodized aluminum s-wand with ABS compression lock compatible with all 1 ½” and 1 9/16” floor nozzles.
9. Vacuflo Turbocat Air Turbine Nozzle, Black
Feature
- No Batteries or additional power needed – runs off your Central Vacuum
- The make-up of the Turbo Cat turbine allows for enhanced airflow and constant contact with the floor surface
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
10. Performance Tool M549 Portable Abrasive Blaster Kit Portable Abrasive Blaster Kit
Description
Portable Abrasive Blaster Kit
Conclusion
By our suggestions above, we hope that you can found Soda Blaster With Vacuum for you.Please don’t forget to share your experience by comment in this post. Thank you!