![](https://images-na.ssl-images-amazon.com/images/I/51LbW1tgeAL._SL700_.jpg)
823 reviews analysed
1. Vacuflo Turbocat Air Turbine Nozzle, Black
Feature
- No Batteries or additional power needed – runs off your Central Vacuum
- The make-up of the Turbo Cat turbine allows for enhanced airflow and constant contact with the floor surface
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
2. Cen-Tec Systems 94775 CT20QD Quiet Drive Central Vacuum Nozzle with Integrated Wand, Black
Feature
- Suitable for use with all major brands of central vacuums, including: Beam, Electrolux, Eureka, VacuMaid, Vacu-flo, MD, Cyclovac, Canavac, Nutone, M&S, and Imperium with a flush mount hose
- Includes wand release, wrap around bumper, headlight, reset button and a height adjustment
- Quiet Drive poly-v belt is always in contact, which results in a dual brushed edge cleaning so no dirt escapes
- Can be used to replace a Nutone CT600
- Includes a soft molded bumper front and side bumper. A clear view window to confirm the agitator’s operation. Soft over molded wheels to run smoothly on carpet and quiet on hard floor surfaces
- Has a four position height adjustment allows the brush agitator to be set to carpet conditions for optimum cleaning
- A quick release neck permits the cleaning wand to drawn from the brush for above the floor cleaning
- The fully integrated telescopic electric wand connects the CT20QD to central vacuum and canister electric hoses with a flush plug position electrical connection.
3. Wessel Werk EBK 360 Power Nozzle with Integrated Wand for Central Vacuum Systems
Description
The German engineering of the EBK360 by Wessel Werk means you can be sure you are getting a high quality, deep cleaning powerhead. With an impressive 5 position carpet height adjustments, quick neck release and wand release you get convenience plus versatility. The bright LED headlight will save energy and last longer than traditional headlights. The Wessel-Werk EBK360 has a rubber strip and soft rubber wheels making it ideal for use, not only on carpeting, but also on bare floors. With a chevron designed roller brush the effectiveness of the brush roller and it’s cleaning ability is maximized. Sale is for EBK360 and integrated wand only.
4. Cen-Tec Systems 93642 Central Vacuum Low Voltage Kit 35 Ft. Hose Light Gray
Feature
- Includes a 1.375” x 35 foot pearl gray low volt hose providing on off control of the central vacuum from the 360 degree swivel handle
- The hose is a soft crown, lightweight crushproof construction that resists kinking and won’t mark furnishings or floors. The wall end is designed to be compatible with industry standard wall inlets with split low voltage contacts
- Compatible with all major brands of central vacuum including eureka, beam, electrolux, hoover, cyclovac, vacuflo, vacumaid, md, m&s, husky, canavac, Honeywell, and well as most regional brands
- The premium chrome telescopic wand features cen-tec’s trademarked button down to make it easy to release the wand from the hose handle for use of the premium accessories
- Features a 12” hard floor brush with natural fill to protect hardwood, tile, marble, stones, and vinyl flooring from marks or scratching
- The hose and most of the accessories are manufactured in the usa
- The 10.5” automatic combination nozzle is ideal for carpets and area rugs and can pass across different floor surfaces without the need to make adjustments to the tool
Description
Cen-Tec’s 93642 is designed to provide the cleaning accessories most often requested in a low voltage central vacuum hard floor and general-purpose attachment set. The 1.375” x 35 foot hose is longer than the industry standard 30 feet to insure you reach everywhere in your home. A hose with an inner diameter of 1.375” insures superior airflow and improved cleaning performance that also assists the performance of air turbine tools often used with low voltage hoses. Further, the hose allows for switch control to turn the central vacuum on and off at the handle. A 12” natural fill floor brush and fully automatic combination nozzle address hard surfaces, area rugs, and even carpeted surfaces. A premium chrome ratchet telescopic wand with the easy release button down feature and a full set of premium above the floor accessories address upholstery, stairs, table tops, crevices, and baseboards. The tool caddy clip lets them travel with you while you clean. The 93642 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, MD, M&S, Husky, Canavac, Honeywell, and well as most regional brands.
5. Cen-Tec Systems 93059 Central Vacuum Kit with Switch Control 50′ Hose, 50 Ft
Feature
- Compatible with all major brands of central vacuum systems equipped with industry standard pin jack inlet valves, including: beam, Electrolux, vacuflo, vacumaid, nutone, hayden, md, canavac, cyclovac
- The wall end is designed to fit nutone and other inlets with a measured 1.50 Diameter opening. The hose will work with standard accessories and any of the industry air turbine nozzles
- Comes with two floor nozzles
- One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush
Description
The 93059 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93059 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.
6. Cen-Tec Systems 92938 Central Vacuum CT20DXQD Kit with 35′ DC Hose
Feature
- Compatible with all major brands of central vacuums with these inlets including beam, Electrolux, eureka, nutone, vacumaid, vacuflo, husky, canavac, cyclovac, md and imperium
- Package includes a power nozzle, integrated electric telescopic wand, and 35 foot total control electric hose allowing you to control both the vacuum and the power nozzle from the hose handle
- The 35 foot hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle
- The quiet drive poly-v drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. Premium American made dusting tool, upholstery tool, and crevice tool can be caddied on the wand using the provided tool clip letting you take them along for faster cleaning
- 14 inches wider power nozzle
Description
The 92938 central vacuum accessory package is designed to provide superior cleaning for today’s home with a mix of both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life-time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishings. We have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The direct connect end makes the system compatible with all major brands of industry standard high volt and low volt electrified inlet valves. By connecting to all major brands of electrified inlets the 92938 is compatible with all major brands of central vacuums with these inlets including beam, ELECTROLUX, eureka, Nutone, VacuMaid, Vacuflo, husky, Canavac, Cyclovac, Md and imperium brands. A 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle ideal for cleaning hard floor surfaces. The three position switch also allows you to also control power to electric nozzle and the vacuum when cleaning carpeted surfaces. A soft anti-microbial treated cotton-lycra blend hose Sock is installed on the hose to protect for surfaces, furnishings, and walls from the corrugation of the hose. The hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance.
7. Cen-Tec Systems 94060 Premium Total Control Central Vacuum Electric Powerhead Package with 30 Foot Hose, Black
Feature
- Includes the 14 inch CT16QD Quiet Drive full featured power nozzle for deep cleaning of all carpeted surfaces
- The CT16QD features a chevron brush agitator design which is shown to improve cleaning effectiveness by pull dirt to the center of the nozzle where it is carried away in the air stream. The agitator is driven with a life time poly V belt reducing noise and vibration
- The power nozzle is connected to the electric hose through a fully integrated electric wand eliminating assembly, optimizing airflow, and offering a positive reliable electric connection between the power nozzle and hose. The quick release feature on the power nozzle makes use of this wand for above the floor needs fast and easy
- Includes a 30 foot total control hose with pigtail connection, allowing control of the central vacuum power as well as the nozzle from the comfortable to hold 360 degree swivel handle
- The three position switch allows the power nozzle to be shut off for cleaning hard floor surfaces while maintaining operation of the central vacuum.
- The 34905 12” hard floor brush with a full natural fill making it ideal for use on hard wood floors, laminate, tile, stone, vinyl, and parquet flooring without risk of damage to the floor surface
- Compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Hayden, Vacumaid, Vacuflo, Cyclovac, Honeywell, Husky, Nutone, Canavac, MD, Imperium, and Galaxie as well as other regional brands
Description
The 94060 full feature central vacuum cleaning accessory package is designed to deliver all the premium features sought in an electric accessory package. The CT16QD power nozzle delivers on the three most sought benefits associated with an electric power nozzle: deep cleaning helping preserve carpet life, brushed edge cleaning, and excellent surface grooming of the carpet surface helping to maintain carpet appearance. The poly-v Quiet Drive system reduces noise and vibration from the power nozzle. A window over the agitator allows easy confirmation the nozzle is running. . The 30 foot crush proof total control electric hose with pigtail connection is designed for universal use and features a 360 degree swivel handle and a three position switch allowing independent control of the power nozzle and the central vacuum. A full complement of accessories addresses the need for a hard floor brush solution and extends the benefits to all above the floor cleaning needs. The 94060 is compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Hayden, Vacumaid, Vacuflo, Cyclovac, Honeywell, Husky, Nutone, Canavac, MD, Imperium, and Galaxie as well as other regional brands.
8. NuTone CT700 Deluxe Central Vacuum Electric Power Brush Tool
Description
The NuTone CT700 Electric Power Brush prolongs the life of your carpet with deep cleaning action, and save you time and energy. Easy-to-use touch-of-the-toe levers make changing wands or switching carpet heights simple because you don’t have to keep bending over to make adjustments.
9. Ultra Clean 30′ Hose Kit with Beam Central Vacuum Electric Powerhead Sweep N Groom Rugmaster
Feature
- Central Vacuum Electric Carpet Powerhead Sweep n Groom: Pigtail style power cord, All steel chromed beater bar, On / Off foot pedal switch
- Ultra Clean 30 foot Deluxe 3-Way Switch Electric Hose, color of the hose may vary: silver or light grey according to availability and at Seller’s discretion. “Pigtail” or “Direct Connect” configuration available.
- PLEASE SPECIFY HOSE CONFIGURATION UPON PURCHASE by sending a message to Seller. If no hose configuration is specified, “Pigtail” will be sent as this is the most common for the majority of the households
- Set of cord management wand and a MUST HAVE microfiber dusting cloth.
- All Brand New in a Box – For technical support before purchase, call: 929.800.2980
10. Broan-NuTone CT150B Deluxe Combination Floor/Rug Tool Central Vacuum Hose Attachment
Conclusion
By our suggestions above, we hope that you can found Central Vacuum Airvac Powerhead for you.Please don’t forget to share your experience by comment in this post. Thank you!