575 reviews analysed
1. Vacuum Tubes 7-Pin 5654W Upgrade for 6AK5 6J1 6J1P EF95 Pairing Tubes 2PCS
- Each package contains a pair of fully tested and matched military version vintage US-manufactured JAN 5654W vacuum tubes(2 PCS).
- Substitute for 7-pin 6AK5/6AK5W/6Zh1P/6J1/6J1P tubes. It can also directly replace WE-403A/403B/EF95 and ordinary 5654.
- Note：Replacing the wrong type of tube may damage your amplifier. If you are not sure this 5645W can be used as a replacement for your audio device, please check with your amplifier manufacturer.
- It has a fuller, wider sound stage. The treble is smoother and bass is a little bit tighter. And you can hear some details that you did not hear before while more complex music.
- Every package you get goes through our careful packaging. With 18 months warranty. If you have any questions, please feel free to contact us.
2. Douk Audio T3 PRO MM Phono Stage Preamp Mini Stereo Vacuum Tube Preamplifier
- With MM signal input and 3.5mm AUX input(with priority), can be used as a MM phono preamp and a tube preamp, compatible with many audio devices such as MM record player, phone,TV, MP3 players, CD players, DAC, computers etc. to satisfy different demands.
- Reasonable curcuit layout and concise wiring to ensure HiFi clear sound with low noise, adopting 2PCS 6J2 vacuum tubes(can be replaced by 6K4 / 6J1 / 6J4 / GE5654 / 6AK5 / 6*1n) to make sound warm, dynamic and sweet, bringing extremely high-quality listening experience.
- With gain adjustment switch(OFF-39dB-42dB-45dB), convenient to match better with different audio signals, the front panel are machined with wire drawing and frosted technology, looks more fashionable and distinctive.
- Mini size with exquisite appearance, aluminum alloy chassis with better shielding performance and gold-plated terminals with lossless transmission, perfectly suitable for MM record players and other audio sources.
- Notice: this is only a preamp, which needs to be used with amplifiers or active speakers.
With MM signal input and 3.5mm AUX input(with priority), can be used as a MM phono preamp and a tube preamp, compatible with many audio devices such as MM record player, phone,TV, MP3 players, CD players, DAC, computers etc. to satisfy different demands.
Reasonable curcuit layout and concise wiring to ensure HiFi clear sound with low noise, adopting 2PCS 6J2 vacuum tubes(can be replaced by 6K4 / 6J1 / 6J4 / GE5654 / 6AK5 / 6*1n) to make sound warm, dynamic and sweet, bringing extremely high-quality listening experience.
With gain adjustment switch(OFF-39dB-42dB-45dB), convenient to match better with different audio signals, the front panel are machined with wire drawing and frosted technology, looks more fashionable and distinctive.
Mini size with exquisite appearance, aluminum alloy chassis with better shielding performance and gold-plated terminals with lossless transmission, perfectly suitable for MM record players and other audio sources.
Audio input: MM phono / 3.5mm AUX
Audio output: stereo RCA
Output level: 600mV (3mV 1KHz)
Frequency response: RIAA standard
Working voltage: DC12V
Dimensions(L*W*H): 117*95*30mm / 4.61*3.74*1.18 in
Net weight: 310g / 0.68lb
Package weight: 520g / 1.15lb
3. Matched Pair 7-Pin GE JAN 5654W Vacuum Tubes Upgrade for 6AK5/6J1/6Ж1/ EF95/6J1P
- AMPLIFIER DAMAGE CAN OCCUR IF YOU SUBSTITUTE THE WRONG TYPE OF TUBE. 5654W tubes should only be used to replace 7-Pin /6Ж1/6J1/6J1P / 6J1P-EB / 6Zh1P-EV/6AK5/ 6AK5W and EF95 tubes. DO NOT SUBSTITUTE FOR ANY OTHER TYPE OF 7-pin tube.
- Tested and matched Pair tube (2PCS) of low-noise 7-Pin United States GE JAN 5654W are considered one of the best of the 5654 / 6AK5 / EF95 family of tubes for audio use. These vintage US manufactured GE tubes are Mil. Spec. (JAN) Electron Tubes – Higher Durability and Life.
1 Pair*Matched GE 5654 Tubes
4. Nobsound NS-10P Mini Vacuum Tube Preamp Audio Hi-Fi Stereo Pre-Amplifier Treble & Bass Control
- Notice: ① Preamplifier needs to work with amplifiers or active devices
- ② Not PHONO preamp and can’t be used for record players
- Excellent sound performance
- No background noise
- Warm and soft tube sound
- Sound quality enhancement
- Pure tube preamplifier
- Suitable for all amplifiers and music types
- With independent treble, bass and volume control
- Vacuum tubes can be replaced by various models
- Mini size and exquisite appearance
- CNC aluminum shell and front panel
- Blue tube light
- Mellow and solid touch feeling
5. XDUOO TA-05 Stereo Tube Headphone Amplifier 6J1 HiFi Vacuum Tube Preamplifier Transistor Power Amplifier
- Adopt double 6JI tube for pre-amp, making voice sweet and exquisite
- Making the sounds thorough and sweet
- Adopt transistors for class A buffer, so it can easily drive any kind of earphones with strong load capacity.
- Built-in mute circuit when turn on amplifier to avoid POP noise and make sure the tube is worked at its best condition.
- Built-in overvoltage/overcurrent protection, so that it can be prevented damage to the amplifier if the input voltage/current exceeds the limit value.
About tube + transistor amplifier
Tube amplifier has its unique “smell of tube”, sweet, soft, warm and listenable voice and good musicality and atmosphere; but its high-
frequency transient response and resolving power are worse than that of transistor especially when listening to symphony.
“Transistor” has the advantages of large dynamics, high speed, strong resolving power and strong driving force, especially suitable for
the songs with large dynamics; but it is not soft enough and its high-frequency sound is sharp and dry.
Therefore, front tube amplifier and rear transistor combine the advantages of two amplifier circuits to achieve the idea sound effect
and make you immersed in the happy atmosphere of music.
Power source: AC100-240V
Output power: 780mW(32Ωload)
Frequency range: 10Hz-100KHz(±0.5dB)
THD+N: 0.1%([email protected]Ωload)
Size: 19 x 10.6 x 10.5cm
Suitable earphone impedance: 16-600Ω
6.5mm to 3.5mm converter
6. ammoon 5654 6J1 Preamp Electron Vacuum Tube 7-pin for EF95 6AK5 5654 6J1 403A Audio Amplifier Tube Replacement
5654 6J1 vacuum tube, 7-pin.
Only for EF95, 6AK5, 5654, 6J1, 403A amplifier vacuum tube replacement.
High reliability and stability.
HiFi and soft sound, low noise.
Model: 5654 6J1
Heater Voltage: 6.3V
Heater Current: 0.17A
Grid Voltage: 120V
Grid Current: 7.35mA
Grid Electrode Voltage 2: 120V
Grid Electrode Current 2: 3.2mA
Item Size(Single): 4.5 * 1.7cm/ 1.4 * 0.7in (Height * Diameter)
Item Weight(Single): 7g/ 0.25oz
1 * Vacuum Tube
7. 6J1 Vacuum Electron Tube Valve Preamp Amplifier Board Headphone Amp Parts Preamplifier Musical Fidelity Kit AC12V 0.8A
- ★ Connect the 6J1 tube pre-amp between sound source and amplifier, it will effectively filter digital flavor, the music and human voice will be relatively good
- ★ Eight 470UF capacitor filter is very clean, excellent power system lead to no hum, filaments are powered with DC 12V and need to be connected in series in order to reduce noise
- ★ Coupling capacitor is electrodeless electrolytic capacitor with high frequency and low resistance
- ★ Using DC 5.5*2.1 socket and AC 12V transformer, you can also use AC 12V transformer without plug, just need to weld the power cord onto the circuit board
- ★ This kit comes in parts so you can assemble them together by yourself, enjoy the process of building your own tube amplifier
8. Mini 6J1 Vacuum Tube Preamplifier Hi-Fi Stereo PreAmp Treble Bass Control Upgrade
- Mini vacuum tube preamp
- Convenient to improve your sound quality
- Treble & bass adjustment
- Sound is warm and broad
- No background noise
- Audio signal input can be computer, CD, phone and lossless player
- Audio output can be connected to digital amplifiers and active multimedia audio devices
- Three kinds of audio input: RCA
- 3.5mm stereo input
- Easily switching between different sound sources with its audio input selection
- Gold-plated for input and output terminals
- 6J1 valve tube
- Mini size suitable for desktop
- Adding isolation to its power supply part, which can reduce the audio interference to the lowest level
- Please note that this product is a preamplifier. It is not an amplifier and needs to be connected with an amplifier or active audio devices. Also, it is not a phono preamp and can’t work with a turntable. For noise issue:
- There is a large probability that the low-quality audio cable causes the static noise.
- Please make sure the sound source is fine since tube amplifiers will amplify all sound including the noise.
- Please check whether the tubes are plugged well on the tube sockets or not.
- Devices like routers, mobile phones will also interfere in the audio signal and may cause static noise.
- If your problem can’t be solved, please feel free to contact us. We will be very glad to help you and try our best to make you satisfied.
- RCA output: 0.9vrms
- SNR: 98dB
- Distortion: 0.3%
- Treble adjustment range: ± 6dB
- Bass adjustment range: ± 10dB
- Frequency response: 20Hz ~ 20KHz
- Power supply: 12V 1A
- Dimensions: 97.79*117.83*33.31 mm
- Weight: 0.32Kg
- 1 * preamp
- 2 * 6J1 tube
- 1 * 12V 1.5A power supply
9. ARCELI Vacuum Tube Mini Bile 6J1 Preamp Tube Amplifier Buffer Tube Amp HiFi Audio Preamplifier Treble & Bass Adjustment Pre-Amps （Black）
- Bluetooth adopts BTM303 Bluetooth audio 5.0 module, using QCC3003 chip, the receiving distance is longer, more stable, and the sound quality is lossless decoding transmission.
- The Bluetooth decoding part adopts the latest ESS9023 top-level decoding core, and adopts the industry-leading SABRE digital-to-analog conversion technology.
- The USB sound card part uses the well-known BB PCM2704 chip in the fever industry, and the sound quality is warm and sound-resistant, and the sound field is wide.
- Power DC input: 12V voltage input (free distribution high quality power adapter, universal)
- Size: 16 *11.5 *7 CM
1. The tube takes 5-7 seconds to preheat.
2. Signal input program manual self-test, rotate the INPUT knob clockwise, any one of the source signal lights, indicating that the program is normal, you can switch to the audio input gear you need. (Note: INPUT uses a stepless speed potentiometer, which rotates clockwise, and the audio source input selection order is Bluetooth→USB-PC→AUX.)
Audio input: USB-PC audio input *1 group
3.5 stereo input *1 group
Wireless Bluetooth input *1 group
Audio output: RCA output *1 group
Distortion: THD+N: 0.006% (RL > 10 kΩ)
Distortion: THD+N: 0.025% (RL = 32 Ω)
Signal to noise ratio: 99 dB
Dynamic range: 99 dB
Support sampling rate: 16Bit 32k, 44.1k, 48k
2*tube (6N3 tube)
By our suggestions above, we hope that you can found 6J1 Vacuum Tubes for you.Please don’t forget to share your experience by comment in this post. Thank you!