814 reviews analysed
1. 5,500 watt Moonshine Still Controller Electric Heating Elements Tri Clamp Box
Description
Next Generation digital moonshine still controller package v16.3 and we built it from the ground up with the home distiller and brewer in mind. This package was designed, machined, and assembled right here in the USA by us, Hi Proof Products and we are the only company authorized to sell it. This commercial-grade controller is built to be used with our included ULWD 5500 watt ripple heater package. All of our heaters use a third wire ground for your safety in mind.
Please note: The Returning Customer Perks Program at HiProofProducts.com will not register your purchase on Amazon.com. as we have no way of connecting your account to the Amazon purchase. Thanks for your understanding.
2. 5,500 watt Moonshine Still Controller Electric Heating Elements Tri Clamp Box
Description
Next Generation digital moonshine still controller package v16.3 and we built it from the ground up with the home distiller and brewer in mind. This package was designed, machined, and assembled right here in the USA by us, Hi Proof Products and we are the only company authorized to sell it. This commercial-grade controller is built to be used with our included ULWD 5500 watt ripple heater package. All of our heaters use a third wire ground for your safety in mind.
Please note: The Returning Customer Perks Program at HiProofProducts.com will not register your purchase on Amazon.com. as we have no way of connecting your account to the Amazon purchase. Thanks for your understanding.
3. Inkbird ITC-106VH PID Temperature Thermostat Controllers, Fahrenheit & Centigrade, 100ACV – 240ACV with K Sensor for Sous Vide, Home Brewing, Oven, Incubator
4. Inkbird PID Thermostat Digital Temperature Controller Alarm 1800W 120V 15A Pre Wired Output NTC Sensor R25 ℃ 10KΩ Waterproof Probe Heat Cool On Off Pump Control IPB16S
Feature
- One Heat -OR- Cool Output & One Pump Output
- Waterproof NTC temperature sensor (R25 ℃=10KΩ)
- Maximum OUTPUT LOAD:1800W (120V,15A)
- Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
- Fahrenheit and Celsius Display Can Be Choose
- Quick switch between auto mode and manual mode
Description
Description:
1, Plug and play design, easy to use.
2, Built in the fuse, power will be off when the unit is in short circuit or the unit current is over load.
3, The box is made of metal. It connects to the ground line, protecting the personal safety. So please make sure your device power plug is with the ground line.
4, Well design, the back of the unit is mental material which is for heat sink. The stand sides can leave the space between the unit and the surface of the placed objects, in order to distribute the heat.
Specification:
Power Supply Voltage: AC 100-240V 50/60Hz
Max output current: OUT: 15A for 120V AC, 12A for 220V AC
ALARM: AC 250V 3A （resistance load）
Precision display: ±0.2% FS 0.1 °C/ °F(＜1000 °C/ °F); 1 °C/ °F(≥1000 °C/ °F)
Sampling period: 0.5 second
Control output: Output switches power supply build-in Opto MOS, with zero voltage crosspoint switches.
Control Mode: AUTO, Manual and Manual inhibit
Character:
PV: 4 digital 49.9mm height Red LED Letters
SV: 4 digital 48mm height Green LED Letters
Working environmental temperature: -10～55 °C/14～131°F（not freezing or condensation state）
Working environmental humidity: Working environmental humidity
Storage environmental temperature: -25～65 °C/-13～149°F（not freezing or condensation state）
Pacakge:
1x Inkbird PID IPB-16S Temperature Controller
1x 2M/6.56ft NTC Sensor
1x Manual
5. Inkbird PID Temperature Controller with Relay ITC-100VH Thermostat
Feature
- PID and ON/OFF Control Mode with high standard self-adjust function
- Multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
- Accuracy of displaying and controlling 0.1ºC,
- Self-adjusting function and intelligent control of the instrument to ensure the long-term stability.
- Omron relay inside
Description
Model Number:
ITC-100VH — One SSR Output + One Relay Alarm Output (AC 100~240V)
Specification:
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100~240V 50/60Hz
Operating Voltage Range: 85~110% Rated voltage
Power Consumption: 5VA (approx) (100~240VAC)
PV Character: 4 digital 9.9mm height Red LED Letters
SV Character: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS, 0.1ºC (＜1000ºC), 1ºC (≥1000ºC)
Period of Sampling: 0.5S
Temperature Compensation: 0~50ºC
Main Output (Voltage Pulses Output ITC-100V): DC 12V, 30mA, Alarm 1 AC250V 3A (Resistive load) ON/NC
Life Expectancy of Relay: Mechanical≥10,000,000 operations, Electrical≥10,000,000 operations
Weight: 140g (approx)
Environmental Conditions: -10~55ºC, RH 35~85% Humidity (no icy or condensation)
Storage Temperature: -25~65ºC (no icy or condensation)
Data Storage: 10 years
Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
Package Included:
1x Inkbird ITC-100VH Controller
1x Mounting Bracket
1x Manual
6. AGPtek® Universal Digital PID Temperature Controller RNR Control Out Dual display For Fahrenheit(F) and Celsius(C)
Description
This is a bid for a dual display universal digital programmable temperature controller that supports many type of thermocouple sensor. It can be powered by 90-265V AC/DC, Comsumption5VA. DIN 1/16.
3 build-in Auto-Tuning Time proportion PID Algorithms to choose for different applications or environments to be controlled. (for variety of industries or home projects heating or cooling applications.)
Accuracy: 0.2%
Input: Thermo Resistor: PT100, Cu50
Thermocouple: J,S,K,E,Wre3 ~ Wre25
Dimension: DIN: 1/16 (48mmX48mmX80mm)
Weight: about 150g
Individually programmable PID control parameters
P, I, d, controlling period, digital filter coefficient, and more¡ (for control theory experts only)
SSR control ready to connect external Solid State Relay to handle High current.
DIN 1/16, great form-factor to be included/build-in to your product.
Apply with step control,1 independent PID control for heating/cooling over temperature,pressure,level,flowm,etc..Widely used in auto system in line of light industry, chemistry, machine, metallurgy,ceramics,pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc;
One key operation, Auto-tuning PID/ Fuzzy PID control.Easy operation,Reliable performance
Input: TC(K¡J¡S¡E)/ RTD£¨Pt100¡CU50£universal input, or 4-20mA/0-10V signal from standard pressure/level transmitter, (24V/30mA supply available for standard transmitter£
Control output: RELAY SSR SCR 4-20mA 0-10V (If 4-20mA output,you can choose PID control or analog output)
Alarm output: 2 lines output,7 kinds of alarm mode.
7. Inkbird ITC-106VH PID Temperature Thermostat Controllers F and C 100 to 240ACV K Sensor 40DA SSR Solid State Relay for Sous Vide Home Brewing
Feature
- Support reading with Centigrade or Fahrenheit unit
- Dual display window, be able to display measured temperature and set temperature at the same time
- Simplify operational processes and you don’t need to operate more steps if you want to set the definite value
- High accuracy of displaying and controlling. Manual and Auto turning are available
- Power Supply Voltage: AC 100-240V 50/60Hz
Description
Notes: ITC-106 is not suit for industrial use.
Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range： 85～110% Rated voltage
Power Consumption： Approx. 5VA（100～240VAC）
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC（＜1000ºC）；1ºC（≥1000ºC）
Period of Sampling： 0.5S
Temperature Compensation： 0-50ºC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g
Environmental Conditions: -10～55ºC（no icy or condensation）, RH 35-85% Humidity
Storage Temperature: -25～65ºC（no icy or condensation）
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple Temperature Sensing For Temperature Controller
Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass
40A SSR SOLID STATE RELAY for temperature controller
Specifications:
Load Voltage: 24-380VAC
Load Current: 40A
Input Voltage: DC 3-32V
Pacakge:
1x Inkbird ITC-106VH Controller
1x 40A SSR
1x Mounting bracket
1 x K sensor
1x Manual
8. Inkbird F and C Display PID Temperature Controller Thermostat ITC-106RH with K Thermocouple Relay Output AC 100 to 240V
Feature
- Dual display window, be able to display measured temperature and set temperature at the same time
- Support reading with Centigrade or Fahrenheit unit
- Simplify operational processes and you don’t need to operate more steps if you want to set the definite value
- High accuracy of displaying and controlling. Manual and Auto turning are available
- 1 Year Warranty
Description
Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range： 85～110% Rated voltage
Power Consumption： Approx. 5VA（100～240VAC）
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC（＜1000ºC）；1ºC（≥1000ºC）
Period of Sampling： 0.5S
Temperature Compensation： 0-50ºC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g
Environmental Conditions: -10～55ºC（no icy or condensation）, RH 35-85% Humidity
Storage Temperature: -25～65ºC（no icy or condensation）
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple Temperature Sensing For Temperature Controller
Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass
Pacakge:
1x Inkbird ITC-106RH Controller
1x Mounting bracket
1 x K sensor
1x Manual
9. Inkbird ITC-106RL PID Temperature Controller Thermostat Relay Output AC 12 to 24V F and C Display
10. Inkbird AC 100 to 240V ITC-100VH Digital PID Thermostat Temperature Controller 25DA SSR K Thermocouple White Heat Sink
Feature
- PID and ON/OFF Control Mode with high standard self-adjust function
- Multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
- Self-adjusting function and intelligent control of the instrument to ensure the long-term stability.
- Accuracy of displaying and controlling 0.1ºC
- Character: PV: 4 digital 9.9mm height Red LED Letters. SV: 4 digital 8mm height Green LED Letters
Description
Specification
One SSR output + One Relay Alarm Output; AC100-240V;
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range： 85～110% Rated voltage
Power Consumption： Approx. 5VA（100～240VAC）
Display Accuracy: ±0.2%FS 0.1ºC（＜1000ºC）；1ºC（≥1000ºC）
Period of Sampling： 0.5S
Temperature Compensation： 0-50ºC
Voltage Pulses Output (ITC-100V): DC 12V, 30mA;Alarm 1 AC250V 3A (Resistive load) ON/NC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Environmental Conditions: -10～55ºC（no icy or condensation）, RH 35-85% Humidity
Storage Temperature: -25～65ºC（no icy or condensation）
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple:
Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass
25A SSR Specifications:
Load Voltage: 24-380VAC
Load Current: 25A
Input Voltage: DC 3-32V
Heat Sink Size: Roof: 50mm x 60mm. Foot: 80mm x 50mm. Height: 50mm
Pacakge:
1x Inkbird ITC-100VH Controller
1x Mounting bracket
1x 25A SSR
1x White heat sink
1x K Sensor
1 x Manual
Conclusion
By our suggestions above, we hope that you can found 5500W Heating Element Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!
