We spent many hours on research to finding 1/6 hp 1 amp fan motor, reading product features, product specifications for this guide. For those of you who wish to the best 1/6 hp 1 amp fan motor, you should not miss this article. 1/6 hp 1 amp fan motor coming in a variety of types but also different price range. The following is the top 10 1/6 hp 1 amp fan motor by our suggestions
947 reviews analysed
1. A1403, 1/6HP 825RPM Condenser Fan Motor
- 1/6 HP AC Condenser Fan Motor, 1-speed at 825 RPM, 208~230V, 1.0 AMP
- Capacitor (not included): 5 MFD/370V
- Replaces: AOS Century FSE1018SF, Emerson: 1873, MARS 10403, Fasco D798, GE/Genteq 3403, Packard 60825, Rheem Protech 51-23055-12, Marathon X465
- Features: All Angle, ball bearing Rheem mounting holes w/screws installed Water slinger on shaft Thru-bolt or band mounting Capacitor requirement noted on motor label Double full flatted shaft Specifications: Class B insulation Single phase, 60 hertz Thermal overload protected Fan duty, continuous, air over Totally enclosed non-ventilated 36 inch leads
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands. If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
- Repair video: https://youtu.be/VxEcFCR6TkI In addition, the motor comes with drain plugs on both end-shields. If you install the motor shaft (facing) down, you need to remove the drain plug on the shaft side end-shield. If you install your motor shaft up, you need to remove the plug on the non-shaft end. This will allow moisture and condensation to drain out of the motor
2. Fasco D917 5.6-Inch Condenser Fan Motor, 1/6 HP, 208-230 Volts, 1075 RPM, 1 Speed, 1 Amps, Totally Enclosed, Reversible Rotation, Sleeve Bearing
From the Manufacturer
PSC motor, 4 drilled and tapped holes in the shell, all angle mount bearings, 60 Degree ambient temperature rating, 1/2-Inch x 5-1/2-Inch shaft, 7.5mfd/370V Capacitor Needed – Not Included
3. Packard 43405 5 5/8" Diameter Condenser Fan Motor, 1/6 HP, 208-230 Volts, 1500 RPM
Replaces Carrier HC33GE208. Permanent Split Capacitor. Requires 4MFD/370V Capacitor. CCW Shaft End. Totally enclosed. Automatic overload. Ball Bearing. 60 Hertz. H.P: 1/6. Speeds: 1. Amps: 0.9. Rotation: CCWSE. RPM: 1500. Bearings: Ball. Enclosure: Totally Enclosed. Motor Type: PSC. Overload Protection: Automatic. Herz: 60. Shaft Dimensions: 1/2 x 1 3/8. Class Insulation: B. Length Less Shaft: 4 in. Voltage: 208-230. Capacitor Required: 4MFD/370V.
4. A.O. Smith OGD1026 1/4 HP, 1075 RPM, 1 Speed, 48 Frame, CCWLE Rotation, 1/2-Inch by 3-1/4-Inch Shaft OEM Direct Replacement
Century OGD1026 model 1/6 hp 1075 RPM single speed, goodman/janitrol oem – direct b13400-251, 4M287, f48f96a76, f48a90a76, 3216
5. New WEG 1HP Electric Motor Fan Pump 56 frame 3480 rpm 1 phase 115/230 volt
Technical Info: Horsepower: 1 Amperage: 6.10 fl amps at 230v Phase: One / Single Phase 2 pole Voltage: 115 / 208-230 RPM: 3480 Torque: 1.49 lb.ft Base: Reinforced fixed base Frame: 56 Shaft Diameter: 5/8″ Keyed shaft Shaft Length: 1.874″ Rotation: Reversible CW or CCW Rotatio Frequency: 60hz Service Factor: 1.00 @ 230v Enclosure: ODP Open Drip Proof (internally fan cooled) Construction: Rolled Steel Overload: Yes – Manual reset button Efficiency: (100%) 67.0 Weight: 36 lbs Additional Product information: Made in Brazil – Capacitor start allows for high starting torque
6. Century 464714 FSE1016SV1 OUTDOOR CONDENSER FAN MOTOR, 5-5/8 IN, 208/230 VOLTS, 1.0 AMPS, 1/6 HP, 1,075 RPM
- All Angle Mount – Totally Enclosed, Extended thru bolts both ends
- Sleeve bearing, 26″ leads, Automatic thermal overload protection
- 1/2″ diameter shaft double flat, 48″ Frame (5-5/8″ Dia), Class “B” insulation
- Permanent split capacitor, 60° C ambient, 4, 6 & 8-Pole, Energy efficient
- Reversing plug, 60 HZ, Reversible Rotation, Service Factor 10, RPM: 1075
Century New Cond Motor 1/6 HP 1075 RPM 230V T/E
7. Condenser Fan Motor, 1/6 HP, 1.0A
8. FASCO D793 CONDENSER FAN MOTOR, 5-5/8 IN., 208 / 230 VOLTS, 1.0 AMPS, 1/6 HP, 825 RPM (1 PER CASE)
9. Fasco D793 Condenser, 5.6-Inch Frame Diameter, 1/6 HP, 825 RPM, 208-230-volt, 1-Amp, Ball Bearing
Single Phase, PSC, 1 Speed, Rev. Rotation, Totally Enclosed, Shaft Dimension – 1/2 x 6, Motor Length – 4-Inch 60-Degree C ambient, All angle mount bearings, Use rainsheild if needed.
10. Century 96455.6-Inch Frame Diameter 1/6 HP 1625 RPM 208-230-Volt 1-Amp Sleeve Bearing Blower Motor
Single Phase, PSC, 1 Speed, Rev. Rotation, Open Vent, Shaft Dimension – 1/2 by 4-1/2, Motor Length – 3-5/8-Inch Mounting rings incl., Reversing plug, 40-Degree C ambient.
By our suggestions above, we hope that you can found 16 Hp 1 Amp Fan Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!