818 reviews analysed
1. Camco 02102/02103 1000W 120V Screw-In Water Heater Element – High Watt Density
Camco RV 1000 Watt Universal Element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included. 1000w – 120v.
From the Manufacturer
Camco’s 1000W 120V screw-in type high watt density water heater elements can be used in most replacement situations of the same wattage and voltage. High Watt Density elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
2. DERNORD Immersion Cartridge Heater 120V 1250W Hot Rod Heating Element Replacement 3/4 Inch Thread
- Cartridge Heater 120v 1250w
- Thread: 3/4 Inch
- Tube length: 263mm (10.4 Inch), Tube Diameter: 19mm
- Cartridge heaters is consist of a cylindrical stainless steel 304 tube and thus provide a high corrosion prevention
- Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
1250W Cartridge Heater: Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
From the Manufacturer
The Dernord 120v 1250w Cartridge heaters are an extraordinarily versatile and durable product that is used to heat a myriad different processes from heavy industrial – plastics and packaging applications to critical care medical devices and analytical test instruments to being used on aircrafts, railcars and trucks. Cartridge heaters are capable of operating at temperatures of up to 1400F and achieving watt densities of up to 260 watts per square inch.
1: Boiling water because of flange
2: Patient Comfort heating used in medical devices
3: Mold die and platen heating
4: Seal bars used in packaging equipment
5: Heating of hot stamps
Thread: 3/4 Inch
Tube length: 263mm
Wire length: 50cm
3. Chattanooga Heating Element For E1, E2, M2 Hydrocollator Heating Units
Hydrocollator M2 Parts – Replacement Coil for M2 Hydrocollator.
4. DERNORD 2 Inch (OD64) Tri-clamp 120V 1500W Foldback Heating Element Electric Water Heater with Low Watt Density
- SUS304 Tri-clamp Foldback heating element provides 1500w 240v of power
- Tri-clamp connection: 2″ Tri Clamp
- Ferrule Size: 64mm Pipe OD
- Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm
- With SUS304 Materials Cap,easy to Install and fits Standard 2″ tri-clover coupler of American
- Prevent dry firing, lime deposits, and sand that would burn out ordinary elements
2 Inch (OD64) Tri-clamp 120V 1500W Foldback Heating Element : Replacement American standard water heater parts
From the Manufacturer
The Dernord 120v 1500w Low Watt Density Screw in Foldback Water Heater Element has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Mounting Type: Threaded
Connection type: Tri-clamp Type
Tri-clamp Size: 2 Inch
Ferrule Size: 64mm Pipe OD
5. Mor-Infrared FT-1000-120-0-L6-WH-0 Ceramic Infrared Heating Element for Industrial Processing Applications – 120 Volt – 1000 Watt – White Glaze – 9.65 Inches Long x 2.36 Inches Wide
- Standard 6 Inch beaded power leads with Pin Connectors
- FT Series (Full Trough Concave Curved Full-Pour Casting Emitter)
- 96% infrared energy efficient
- A two piece mounting clip is supplied with each heater and allows for easy mounting in an aluminized steel or stainless steel reflector
- Ceramic heaters are placed in a variety of reflectors to be used individually or as multiples in panels
Recommended distance of 8″ (200mm) to material being heated.
Heating wire embedded into concave shaped heater creates infrared in focused rays.
12 month warranty against burnout. (Estimated life in excess of 10,000 operational hours.)
Ceramic tubes over power lead wire within mounting tower increases the dielectric strength between the lead wire and mounting clip preventing a potential fault to ground.
Application usage is almost anywhere a non-contact heat source is needed in industrial process heating applications (heating, curing, cooking, and drying.)
Though ceramic, the elements are fairly rugged and are more durable than quartz, and cleaning is easy, with their splash-proof, non-corrosive, glazed finish, which also makes them the ideal choice for use in food handling, medical facilities, or other antiseptic applications. The large variety of sizes, shapes, and watt densities allows ceramic elements to be highly useful in zoning arrangements such as plastic thermoforming where complex heating patterns are needed.
For best results, the surface temperature of the Mor-Infrared ceramic infrared heater should be controlled using an open-loop (percentage timer) or a closed-loop (thermocouple feedback with digital temperature control) system. The infrared emission intensity is directly related to the surface temperature of the ceramic body.
Ceramic Heaters are mounted with the back side mounting post inserted through a pre-cut hole in a reflector. For best results the reflector should be highly reflective (polished aluminized steel) and capable of withstanding high temperatures.
6. DERNORD 120V 1000W Immersion Water Heater Submersible Heating Element Heater Element with 1 Inch NPT Fitting
1000W Immersion Water Heater Element : Replacement American standard water heater parts
From the Manufacturer
The Dernord 120v 1000w High Watt Density Screw in Immersion Water Heater Element has a compact, energy efficient design that is well suited for many applications. It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Item Weight: 8.5ounces
Voltage: 120 volts
Item Package Quantity: 1
7. AIICIOO Tri-Clamp Foldback Water Heating Element – UPGARDE 120V 1500W 1.5 Inch (OD 50.5mm) Electric Immersion Water Heater Stainless Steel Low Watt Density
- PACK WITH – 1.5 tri-clamp heating element, stainless steel Cap and PG21 cable gland protector
- MATERIAL – Stainless steel 304 heater and cap for long lifespan and rust free, food level
- LOW WATT DENSITY – The fold back shape maximize heated working surface in limited tube length and space
- With GROUND – The heater was upgraded with earth screw for more safety.
- APPLICATION – Home water heater part replacement, homebrewing,boil kettle and distilling boilers etc
8. Diximus 10in 1000W-110V Water Heater Portable Electric Immersion Element Boiler Travel
- Portable immersion bucket water heater is simple electric appliance for heating liquids.
- Total length: 10″, Metal sheel length: 7.3″, Metal sheel Diameter: 0.256″
- AC: 110 V, Power 1000 W, 4.9 ft Cable
- New and High Quality water immersion heater, Very Compact heating coil. Heating up water to the right temperature or boil egg, potato, etc.
- Portable electric immersion water heater is Ideal for home, garden, office or travel.
1000W 110V Portable Electric Immersion Water Heater
Portable immersion bucket water heater is simple electric appliance for heating liquids.
Use this lightweight and portable immersion heater for warming liquids (water, coffee, tea, soup and more). Ideal for home, office and travel.
Unlike the electric kettle it has not a vessel for the liquid and needs to be dip in liquid. A tube of portable immersion bucket water heater is used as the heating element in this water boiler.
Portable immersion bucket Water Heater is simple in design and very compact, making it widely distributed.
- Product name: immersion water heater
- Voltage: AC 110V
- Power: 1000W
- Material: 201 stainless steel
- Total length: 10″ ((25.4cm)
- Tube length: 7.3″ (18.5cm)
- Outer Diameter: 0.256″ (Ф6.5mm)
- Wire length: , 4.9 ft (1.5m)
9. Heating Element for MP-1 Water Purification Systems, 120V, 1000W
By our suggestions above, we hope that you can found 120 Volt 1000 Watt Heating Element for you.Please don’t forget to share your experience by comment in this post. Thank you!