591 reviews analysed
1. Watts 0388002 Pressure Vacuum Breaker W/QT Ball Valve, 1"
2. Watts 0887701 Bonnet Assembly Repair Kit
Feature
- Bonnet Assembly Kit Consist of: Bonnet Bonnet ‘O’-ring Vent spring Hood & hood screws
- It consists of bronze body construction, a silicone rubber check valve disc, and a plastic check valve seat
- This pressure vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage
Description
Watts 1″ 800 Repair Part RK 800M4 B. Kit Consists Of: Bonnet, Bonnet O-Ring, Vent Spring, Hood & Hood Screws.
3. Watts 0887710 Vent Repair Kit
Description
Watts 1″ 800M4QT Float Kit – 0887710 Series 800M4QT Anti-Siphon Pressure Vacuum Breakers prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage. It consists of bronze body construction, silicone rubber check valve disc, plastic check valve seat, stainless steel springs, a bonnet with silicone rubber O-ring seal, a lightweight plastic disc float, tee handle or lever handle shutoffs, and test cocks for winterization draining. Series 800M4QT is ideal in health hazard continuous pressure applications such as irrigation systems and industrial process water systems where the water enters the equipment at or below its flood rim. Maximum Pressure:150psi (10.3 bar), Minimum Pressure: 15psi (55kPa)
4. SpigotMaster ~SM-XL Vacuum Breaker Adapter~ Turns a NIBCO or Watts Anti-Siphon Hose Bib Into a Straight Through Connection for Your Garden Hose or Timer
Feature
- Converts NIBCO & Watts Anti-Siphon Hose Bibs Into A Normal Garden Hose Connection That Won’t leak!
- We Make 3 Models to Fit Most Spigots with External Backflow Preventers – MAKE SURE YOU MEASURE BEFORE ORDERING!
- SM01 ~ For Arrowhead Spigots When You Can Remove the Entire Vacuum Breaker. Fine Threads are 1″ in Diameter
- SM01.125 ~ For Arrowhead Spigots When You Can Only Remove the Bottom Part of the Vacuum Breaker or Where the External Thread Diameter Measures 1.17″
- SM-XL ~ For NIBCO Hose Bibs & Watts Spigots Widely Used in Canada Where the External Thread Diameter is 1.25″ (1-1/4″ Fine Thread)
5. Homewerks VAC-BFP-Z4B Vacuum Breaker, 3/4-Inch, BRASS
Feature
- 3/4-Inch self draining vacuum breaker
- Male hose thread
- Break-off screw for permanent attachment
- Meets ASSE 1011/CSA B64.2, Meets ANSI/NSF 61-9
- Max. operating temp. rating: 180º F/82º C, Max. operating pressure rating: 125 PSI
- 3/4-Inch hose thread outlet
- Break-off screw for permanent attachment
- Meets ASSE 1011 / CSA B64.2 Standards
- Meets ANSI / NSF 61 low lead requirements
Description
Product Description
Fits any 3/4 male hose thread outlet. Break off attachment screw for permanent installation. Hose threads comply with ANSI B1.20.7. 3/4 Fits any 3/4 male hose thread outlet Break off attachment screw for permanent installation Hose threads comply with ANSI B1.20.7 Brass Csa certified Asse approved.
From the Manufacturer
Homewerks VAC-BFP-Z4B Vacuum Breaker, Male Hose Thread, 3/4-Inch.
6. Watts 0887704 1" Check Repair Kit
7. Watts 800M4 1" Vent Float Repair Kit – Freeze Resistant 0887715 887715 RK 800M4-FR-V1
8. Zurn 1-720A Wilkins Pressure Vacuum Breaker 1-Inch Assembly
Feature
- Maximum working water pressure 150 PSI
- Maximum working water temperature 110 DegreeF
- Hydrostatic test pressure 300 PSI
- End connections threaded ANSI B1.20.1
- All bronze body and bonnet construction
- Standards Compliance: ASSE Listed 1020, IAPMO Listed, CSA Certified
- Main valve body: Cast Bronze ASTM B584
- Fasteners: Stainless Steel, 300 Series
- Elastomers: Silicone (FDA approved), Buna Nitrile (FDA approved)
- Polymers: Polypropylene (FDA approved), Delran (FDA approved)
9. 3/4 in Bronze Anti-Siphon Pressure Vacuum Breaker, Quarter Turn Shutoff, Tee Handles
Conclusion
By our suggestions above, we hope that you can found 1 Watts Vacuum Breaker for you.Please don’t forget to share your experience by comment in this post. Thank you!
